RunRyder RC
WATCH
 1 page 1505 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade mCPX › mcpx bl binding issues
03-10-2013 08:50 PM  5 years agoPost 1
Spielco

rrNovice

Ohio

My Posts: All  Forum  Topic

Bought this mcpx bl second hand. I've had about 10 flights on her and got it all setting the way that seems comfortable. So today I go an try to fly and after about 20sec of hover I have no control. It's locked. No throttle hold no throttle no rudder nothing. Thankfully it landed on skids since I just lifted off but the motor was still running for about 10 sec. After no control. I unplugged the batt. Powered down the transmitter ans then tried again. Same thing happened!! What the hell is going on!?

I hoping my board isn't fried and help is much appreciated!

Thanks!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2013 09:57 PM  5 years agoPost 2
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

I would try to re-bind it and see what happens.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2013 12:59 AM  5 years agoPost 3
Spielco

rrNovice

Ohio

My Posts: All  Forum  Topic

i did rebind and seemed to fly just fine which was wierd for the 4 min. Is this something youve had to do with this bird?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2013 02:26 AM  5 years agoPost 4
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

If something acts a little weird on these little ones, a re bind seems to cure it.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2013 03:11 PM  5 years agoPost 5
raptor boy

rrApprentice

Corona, CA

My Posts: All  Forum  Topic

Re bind
I did have this problem on a v2 mcpx and took me a some time to figure out that the wires to the battery connecter were loose i had to re sodder them saw this on mine and a friends

flying = crashing

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2013 04:03 PM  5 years agoPost 6
Spielco

rrNovice

Ohio

My Posts: All  Forum  Topic

It seems as everything is connected just fine. But really don't want that to happen often. It just lost all control mid air and took all power away from the transmitter.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2013 05:51 PM  5 years agoPost 7
raptor boy

rrApprentice

Corona, CA

My Posts: All  Forum  Topic

Just double check the connecter from the heli my buddys looked fine intell i cut the shrink of it and the red wire was hanging by a thread

flying = crashing

PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2013 09:21 PM  5 years agoPost 8
Spielco

rrNovice

Ohio

My Posts: All  Forum  Topic

Had some time to fly today. Flew 6 batts threw that little guy beating it up and down. Everything seems to being flying just fine after re binding.

Thanks for the help as always!!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1505 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade mCPX › mcpx bl binding issues
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, August 22 - 6:36 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online