RunRyder RC
WATCH
 1 page 1412 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › DX8 travel adjust issue
01-14-2013 03:27 AM  7 years ago
Topic Vote0Post 1
Ahile

rrNovice

Apple Creek, OH

MyPosts All Forum Topic
DX8 travel adjust issue
Has anyone run into issues using travel adjust on a DX8? I have a flybarred Trex250 that I had setup and flown many times over the past year. I decided to give the 3GX a try so switched over and used a new model on the TX. Never was able to get the 3GX to work correctly. So I decided to switch back to flybarred. Using the original model to reset everything, I am not able to use travel adjust on aileron or elevator servos. It does work on the pitch though. I did do the firmware update to 2.06 recently. I have been through everything several times and can't figure out what is going on. The servos will not move in any direction using travel adjust at high or low stick. I have set swash at mid stick mechanically. Has anyone run into this before?
Adam
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2013 03:54 AM  7 years ago
aerocal

rrApprentice

Central California

MyPosts All Forum Topic
Yes there is an issue with swash channel travel adjust if a channel is reversed.What happens is that the channel gets reversed but the endpoints do not get reflected correctly in the menu.What you end up actually doing is adjusting the opposite side of the channel from what you would expect.To get what you want you have to move the stick to the opposite side from what you want to adjust and then move it back to confirm the setting change.Its kind of a PITA.
Hopefully it will get sorted in an update soon.For now just be aware that on a reversed swash channel you need to highlight the side opposite of what you intend on the travel adjust screen.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2013 04:14 AM  7 years ago
Ahile

rrNovice

Apple Creek, OH

MyPosts All Forum Topic
Thanks, that took care of it! So, they did a firmware update and messed something up that was working just fine prior to the update?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2013 06:34 AM  7 years ago
aerocal

rrApprentice

Central California

MyPosts All Forum Topic
Actually its a bit more complicated.That specific reversed servo issue was not in the last update but it transferred to somewhere else.It has actually been with us from the start with the DX8 and is present in all Airware radios.It is known and Im sure they are working on a solution.Apparantly it is not simple fix.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1412 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › DX8 travel adjust issue
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, April 8 - 12:15 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online