RunRyder RC
WATCH
 1 page 794 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade 130 › blade 130x/jr 12x
01-13-2013 07:24 PM  7 years ago
Topic Vote0Post 1
digger

rrNovice

swindon wiltshier England

MyPosts All Forum Topic
blade 130x/jr 12x
Hi gals and guys

christmas has bean and gone again,

Anyway my wife of seventeen years got me a little blade 130x,and it looks really cool.

The problem is i have bowned it to my jr 12x and it all seams fine,but when i engage the throttal the swash plate leans right over to the right and the tail servo goes over to the left,to the end of its travel,i,v gone back through the trans but cant find a thing wrong

Anyones help would be really great,becuase i havent got a clue

Thanks Bill

SHARE  PM  EMAIL  Attn:RR  Quote
01-13-2013 07:43 PM  7 years ago
oysifly

rrVeteran

Bentonville, AR

MyPosts All Forum Topic
Sounds like maybe a mixing is set up? Be sure that you have chosen 1 servo for the swash.Quick...here comes my wife....hide that new Heli !!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-13-2013 08:01 PM  7 years ago
rc3po

rrVeteran

Danville, Illinois

MyPosts All Forum Topic
Check your swash type in the system menu and make sure it is set to normal or single servo. can't remember the choices in the 12xHappay Happay Happay...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2013 08:10 PM  7 years ago
digger

rrNovice

swindon wiltshier England

MyPosts All Forum Topic
blade 130x/jr 12x
hi guys and gals
its set to one serve,in normal mod
thanks for the reply
SHARE  PM  EMAIL  Attn:RR  Quote
01-14-2013 08:15 PM  7 years ago
oysifly

rrVeteran

Bentonville, AR

MyPosts All Forum Topic
Is it still not working or did that fix it?

Also check your mixing just in case one is active
Quick...here comes my wife....hide that new Heli !!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2013 08:19 PM  7 years ago
rc3po

rrVeteran

Danville, Illinois

MyPosts All Forum Topic
Then try this...

unplug the motor
go to your subtrim menu.
Move throttle up until gyros are active..
Adjust sub trims for aileron and tail until drifting stops.
Throttle down and back up to check for drift, adjust again if neccessary..

PLug motor back in and Go Fly..
Happay Happay Happay...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2013 08:28 PM  7 years ago
digger

rrNovice

swindon wiltshier England

MyPosts All Forum Topic
blade 130x/jr 12x
hello again
sorry to say still not playing,no mixings,i did forget to say that when i pull the throttal back down to the bottom it rights it self WIERD
SHARE  PM  EMAIL  Attn:RR  Quote
01-14-2013 08:41 PM  7 years ago
rc3po

rrVeteran

Danville, Illinois

MyPosts All Forum Topic
yes, its a drift problem that can be subtrimmed out or you can have the controller on the heli replaced. Usually adjusting SUBtrims fixes it. It resets at low throttle when you turn off the gyros. and drifts when they are active again.Happay Happay Happay...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2013 08:51 PM  7 years ago
digger

rrNovice

swindon wiltshier England

MyPosts All Forum Topic
BLADE 130X /JR 12X
Thanks for all the help,i,v tried the subtrim and it throws everything over to the other side ,i think i might try a new controller,(if i tell the wife she might go mental so i will keep it shuss
thanks for your help
SHARE  PM  EMAIL  Attn:RR  Quote
01-14-2013 08:59 PM  7 years ago
rc3po

rrVeteran

Danville, Illinois

MyPosts All Forum Topic
No problem , Hope you get it sorted..
Fun heli for sure..
Happay Happay Happay...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2013 02:27 AM  7 years ago
smartguy

rrVeteran

Corona, CA

MyPosts All Forum Topic
Try the sub-trim on the throttle to negative 110% or more, I believe the sub trim on the throttle on the 12x goes down to like 150, for some reason the 130X will not arm correctly when you have the throttle sub trim set at 100%.Your not an expert because you seen it!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2013 02:58 AM  7 years ago
Jason Cummings

rrVeteran

St. Louis

MyPosts All Forum Topic
Mine did the same thing. Horizon replaced the 3in1 no charge.Synergy Field Rep
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-16-2013 08:05 PM  7 years ago
digger

rrNovice

swindon wiltshier England

MyPosts All Forum Topic
blade 130x/jr 12x
thanks to all who have replied,
I,m still waiting for a replie from horizon u.k,
Thanks for all your help
happy fly,remember,if things dont change ,they will stay as they are?
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 794 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade 130 › blade 130x/jr 12x
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, April 3 - 1:12 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online