RunRyder RC
WATCH
 1 page 1279 views POST REPLY
Home✈️Aircraft🚁HelicopterRobbe Cuatro - Millennium - Nova - Dyna-X › Alternate canopy for the Milli / Dyna-X
01-07-2013 12:14 PM  7 years ago
Topic Vote0Post 1
trillian

rrVeteran

London, UK

MyPosts All Forum Topic
Alternate canopy for the Milli / Dyna-X
For those flying these helis as a pod and boom and wanting a different look, I have recently discovered that the Synergy N9 (and I guess E9 as well) canopy is close enough to fit with a bit of trimming.

Here's how it looks on a bare Milli 2 airframe. This is a Canomod 'Kaiser' N9 canopy).

To get the rear mounts to match the Milli frame requires about 1 1/4 inch cut at the bottom (this also ends up cutting off the original front mount recesses on the canopy).

In these pics I have not yet drilled new front mount holes but the width is close and it should be no problem.

To fit onto a nitro Milli or Dyna-X will require more trimming for the pipe. Unfortunately the recess for the pipe is not quite where it would need to be on the Milli. This one may end up on an electric conversion so would not need any further trimming.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1279 views POST REPLY
Home✈️Aircraft🚁HelicopterRobbe Cuatro - Millennium - Nova - Dyna-X › Alternate canopy for the Milli / Dyna-X
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, April 8 - 12:28 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online