RunRyder RC
WATCH
 1 page 1513 views POST REPLY
01-03-2013 12:12 PM  7 years ago
Topic Vote0Post 1
Auddiss

rrNovice

CT

MyPosts All Forum Topic
ENV vbar
Having trouble getting the 8 degrees set in the 80 to 100 range on the slider. Changed to small jr servo wheels changed balls on inner Swash ring to 4mm quick uk balls( only on pitch links) , and also moved balls to inner hole on all the t levers. Don't know what elese to do, to better the resolution. Any help is appreciated, the model flys great the way it is I just feel it could be a little better. At 80 on the slider im at 9 degrees so I'm in the 70s right now to achieve 8 degrees.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 01:46 PM  7 years ago
eddiscus

rrElite Veteran

Dumont, NJ-USA

MyPosts All Forum Topic
Don't know if you have read this yet. What value do you have to get your desired +/- collective?

http://www.vstabi.info/en/geometry
Logo Xxtreme 800
Logo 700
Citizen 142
Synergy 766
TDR 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 02:35 PM  7 years ago
Auddiss

rrNovice

CT

MyPosts All Forum Topic
Not to sure of the exact number but I'm running 13.5 degrees +/- and it is less then "optimal" on the slider im somewhere in the mid 70s to achieve these pitch values.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 03:10 PM  7 years ago
Ejeremy

rrKey Veteran

Bourbonnais,IL

MyPosts All Forum Topic
Sounds like you need smaller wheels. What's the measurement from center to ball on the current ones you have?

Jeremy
Team Futaba
Team Thunder Tiger
Team Radix
VP Powermaster Fuels
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 04:22 PM  7 years ago
Auddiss

rrNovice

CT

MyPosts All Forum Topic
I'm not to sure the distance on the servo wheels I will have to measure them when I get home. I don't think I have room to go much smaller unless I mount the balls on the outside of the wheel. what sizes are other people running? Are you also mounting the balls on the outside of the wheels ?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 05:11 PM  7 years ago
Ejeremy

rrKey Veteran

Bourbonnais,IL

MyPosts All Forum Topic
Here's the wheels I'm using.

http://www.experiencerc.com/store/q...mm_servo_wheel_(futaba_fitting)_h1080r-p-7416.html

If I remember correctly I'm at 10.5mm but ill measure tonight. I'm also running them on the inside.

Jeremy
Team Futaba
Team Thunder Tiger
Team Radix
VP Powermaster Fuels
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-04-2013 11:18 AM  7 years ago
Auddiss

rrNovice

CT

MyPosts All Forum Topic
Ordered the quick UK wheels, my ball spacing was right around 12mm so hopefully bringing it in that little bit will make the difference
Thanks for the help
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-04-2013 04:06 PM  7 years ago
Ejeremy

rrKey Veteran

Bourbonnais,IL

MyPosts All Forum Topic
I'm at 10.5mm...

Team Futaba
Team Thunder Tiger
Team Radix
VP Powermaster Fuels
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-10-2013 01:29 PM  7 years ago
MIKe27

rrApprentice

Florida,US

MyPosts All Forum Topic
Im having the same problem with my Vbar,over 18 in collective, dont want to chage the servo horns, can i just lower my pitch Atv's and leave at 80 in range?

Thanks
Mike
SHARE  PM  EMAIL  Attn:RR  Quote
01-11-2013 02:11 AM  7 years ago
Auddiss

rrNovice

CT

MyPosts All Forum Topic
The only way is to change the geometry, I just installed the new servo wheels, made a big difference puts you in the "optimal" resolution for the vbar
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1513 views POST REPLY
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Monday, July 13 - 11:18 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online