RunRyder RC
WATCH
 1 page 1314 views POST REPLY
HomeAircraftHelicopter
e-
Henseleit TDR MP-XLE MP-E
› Bought a TDR and have a question- Please Help!
12-31-2012 09:27 PM  5 years agoPost 1
GabrielB1231

rrApprentice

CA

My Posts: All  Forum  Topic

Hey guys I just bought a NIB TDR off a guy on rcgroups. He got it last month straight from Henseleit. There is a piece of paper that says I have to download the 2010 manual. He got this kit this year. From Jan. Is it a 2010 or 2012??? So confused. But I don't think a TDR kit would be sitting for 2 years. But hey I got it for 950 shipped

http://www.rcgroups.com/forums/show...87#post23671870

Here is the add. If you look at the pictures you will see the yellow rice of paper.

Gabe

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2012 09:33 PM  5 years agoPost 2
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

My guess its a 2010, but there wasn't a lot of changes.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2012 09:39 PM  5 years agoPost 3
GabrielB1231

rrApprentice

CA

My Posts: All  Forum  Topic

But TDR's are custom made and they make about uhm maybe 100 . When those 100 come in all the peope on the waiting list get notified and all sell out. When you got your 2011's Bill did it say you need to download the 2011 manual?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-31-2012 10:11 PM  5 years agoPost 4
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

YUP.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
01-01-2013 02:53 AM  5 years agoPost 5
550inTX

rrNovice

The Colony, TX - USA

My Posts: All  Forum  Topic

Original seller didn't state when he bought. Just that it was never built.

Like others said, not much different than a new one. Except the price.

John

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-01-2013 03:58 AM  5 years agoPost 6
GabrielB1231

rrApprentice

CA

My Posts: All  Forum  Topic

He said that he bought it this year straight from Jan. I told him to show receipt and it indeed was bought this year.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-01-2013 01:56 PM  5 years agoPost 7
GregRC

rrApprentice

KENNER, LA USA

My Posts: All  Forum  Topic

Gabriel,

I received my TDR in November and had a similar note. Must have thrown it away when I was cleaning up after the build.

The latest manual is Version 2010-2011, March 2011. My kit came with the following apparent differences from the 2009 version:
3 Bearing 0813. It appears that previous versions had only 2 of these bearings. Bearings are shown on Page 14 of the manual. I hand wrote on page 14 under 280mm the revised dimension of 205mm. I think there was an instruction sheet to change to the 205 dimension.
2 black bushings 0109 and 4 black O-rings as shown on page 10. It appears that previous versions(2009) came with both black and white bushings and black and red O-rings.

Every part in the kit matched exactly what is shown in the March 2011 manual.

Hope this helps in identifying your kit.
Take your time assembling the kit and follow the sequences exactly as shown in manual.

TREX500; TREX 700; LOGO 600SE; TDR

PM  EMAIL  GALLERY  Attn:RR  Quote
01-01-2013 04:13 PM  5 years agoPost 8
GabrielB1231

rrApprentice

CA

My Posts: All  Forum  Topic

Wooo Hooo! Got a 2012 TDR for a great price. Reggie( original owner) and myself agree des on a price for a "2010" model. But im going to make this right and give him a little more money. Happy New Years!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-04-2013 02:06 AM  5 years agoPost 9
Chris.C

rrVeteran

Hong Kong

My Posts: All  Forum  Topic

Received the kit last week.

Up to the assembly of the swashplate and found that screw 0400C and d is not included and not needed.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-08-2013 05:06 AM  5 years agoPost 10
GabrielB1231

rrApprentice

CA

My Posts: All  Forum  Topic

Got my TDR today. Just finished the canopy. Pain in the butt! Took 2 hours to do.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-08-2013 06:04 AM  5 years agoPost 11
Chris.C

rrVeteran

Hong Kong

My Posts: All  Forum  Topic

Found that a few parts were assemblied in the factory(I supposed), do you guys re-assemble them?

I normally do with Trex kit but this is not a Trex, hence the question.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-08-2013 07:16 AM  5 years agoPost 12
Camnick13

rrNovice

Illinois, USA

My Posts: All  Forum  Topic

Align kits, definitely yes. But for TDR, you can trust Jan 100 percent.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-08-2013 05:31 PM  5 years agoPost 13
HilliHeli

rrVeteran

S.MI./FL.

My Posts: All  Forum  Topic

I disassembled, cleaned, re-loctited and reassembled just to make sure, none of the assemblies had been done incorrectly from the Hense' factory (2010 kit).

!Antriebe, die bewegen!
Henseleit-Helicopters.de
Jazz', Jives & vbar's
Futaba FASST / FASSTest

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1314 views POST REPLY
HomeAircraftHelicopter
e-
Henseleit TDR MP-XLE MP-E
› Bought a TDR and have a question- Please Help!
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Wednesday, July 18 - 12:27 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online