RunRyder RC
WATCH
 4 pages [ <<    <     2      3     ( 4 )    >    >> ] 5223 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoLogo 700xx › logo 700
04-07-2013 04:55 PM  6 years ago
BobOD

rrElite Veteran

New York- USA

MyPosts All Forum Topic
I mean was it a fast or slow wag.Team POP Secret
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-07-2013 06:49 PM  6 years ago
Flippy

rrNovice

Tillsonburg, Ontario, Canada

MyPosts All Forum Topic
The wag was not fast. It would move right and back to the left point in about 1 sec. Total movement was about 7 or 8 inches.
When pirouetting slow, it would slow down, speed up, slow down, speed up......... Exactly like the second hand on a clock.
SHARE  PM  EMAIL  Attn:RR  Quote
04-11-2013 12:22 AM  6 years ago
rexxigpilot

rrProfessor

rexxig2@comcast.net

MyPosts All Forum Topic
NOTAM - If having a wag problem, check your tail control bellcrank mount bracket to see if it is loose! I flew my Logo 700 today and still had a wag after changing many V-bar parameters and adjusting the link length to add pitch against main rotor toque. Nothing seemed to help. While going over everything on the heli I grabbed the bellcrank bracket and it wiggled! Took the tail case side plate off and reinstalled the bracket with more Loctite. Wag is gone!!!

I barely avoided a catastrophe! I'll definitely keep an eye on that part.

One other thing I found - the canopy is hitting the top of the V-bar sensor when loaded with positive g's. There is a small groove where the canopy has worn into the top of my sensor. Unfortunately, we can't move the sensor to the center and still have access to the USB port on the main V-bar unit. I guess I can shove the sensor back to possibly avoid this issue.

Has anyone else found this to happen? Perhaps Mikado could modify the canopy slightly to provide a tad more clearance or provide a separate mounting plate for the sensor.

Is there a thread for suggested Logo 700 Version 2 improvements?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-11-2013 12:26 AM  6 years ago
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
Raise the main unit on the tray to access the USB with more tape.Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-11-2013 12:32 AM  6 years ago
rexxigpilot

rrProfessor

rexxig2@comcast.net

MyPosts All Forum Topic
More tape...like 20 pieces? It needs to come up quite a bit to clear. I can probably use a stack of CF plates to raise it enough.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 4 pages [ <<    <     2      3     ( 4 )    >    >> ] 5223 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoLogo 700xx › logo 700
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Tuesday, July 23 - 8:43 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online