RunRyder RC
WATCH
 1 page 775 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 500 › Cheap pro 3d blades?
12-07-2012 06:30 PM  7 years ago
Topic Vote0Post 1
Tbird

rrKey Veteran

Indiana

MyPosts All Forum Topic
Cheap pro 3d blades?
Looking for a cheap alternative to some blades, has anyone tried these pro 3d blades for like 20 bucks?

http://www.experiencerc.com/store/4...301-p-7908.html
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2012 08:48 PM  7 years ago
courtjones

rrApprentice

florida

MyPosts All Forum Topic
This is all I fly even on my flybarless system. You are good to go with these.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-25-2013 01:27 PM  7 years ago
bladerunner210

rrNovice

san antonio texas

MyPosts All Forum Topic
I was just looking for something like this thanks guys!!
+1
SHARE  PM  EMAIL  Attn:RR  Quote
03-25-2013 01:51 PM  7 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
Check out eBay there is another guy selling blades for 18 bucks and selling from the us, those have been working great on a fbl 500
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-25-2013 02:22 PM  7 years ago
bladerunner210

rrNovice

san antonio texas

MyPosts All Forum Topic
Will do has anybody tried hard 3d with these?
SHARE  PM  EMAIL  Attn:RR  Quote
03-25-2013 04:50 PM  7 years ago
steve 01

rrProfessor

Grand Rapids MI

MyPosts All Forum Topic
On the eBay ones yes , the 3d pro blades were a little slow and did not track well for me
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-25-2013 05:25 PM  7 years ago
bladerunner210

rrNovice

san antonio texas

MyPosts All Forum Topic
Thanks for the in put much appreciated what are you using now?
SHARE  PM  EMAIL  Attn:RR  Quote
03-25-2013 05:32 PM  7 years ago
courtjones

rrApprentice

florida

MyPosts All Forum Topic
Yes you can do hard 3d with no problems.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-25-2013 07:24 PM  7 years ago
jhartsock3

rrApprentice

Greenwood, IN

MyPosts All Forum Topic
Haven't flown the 500 blades but have flown the 550, 450, 250 size blades. both on fly-bared and fly-barless. Worked well for me but I am not a 3d guy. So yes I would recommend them.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-25-2013 07:55 PM  7 years ago
3dgimble

rrKey Veteran

Rochester

MyPosts All Forum Topic
Tried all the Pro 3D sizes except the 250, used them for hard 3D with high HS, they fly nice from 325-700mm, however I went through about 30-40 pairs or more of them, and I can say 80% of them had flaws in paint or mounting hole angle was incorrect or some carbon was missing, or unbalanced weight, or hard to track, I suspect the slant with the mounting eyelet. Sometimes with 1 to up wards of 3 combinations of the above faults I have flown, but when you do get one thats has a small imperfection you'll be happy. I now have moved on since, I crash a lot less, to higher end blades that have less of these faults.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 775 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 500 › Cheap pro 3d blades?
Print TOPIC

 4  Topic Subscribe

Wednesday, October 28 - 7:10 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online