RunRyder RC
WATCH
 1 page 1155 views Post Reply
Home✈️Aircraft🚁Helicoptere-Thunder TigerRaptor X50E › Raptor G4 landing gear for the X50E
12-05-2012 11:05 PM  7 years ago
Topic Vote0Post 1
january flyer

rrApprentice

Lake Charles Louisiana 70601

MyPosts All Forum Topic
Raptor G4 landing gear for the X50E
If anyone is looking for a stronger landing gear the G4 will work with a small mod. Take the stock X50E gear, and use the outside holes that you don't use when mounting the gear on the X50E. Those holes are the same mounting spacing for the G4. Bolt the two gear together. Use the X50E gear mounting hols as a drilling guide.

Drill the holes in the new G4 gear. Grind off a little of the G4 mounting pads, and you're good to go. The fin is about 4mm lower then with the stock gear. I fly off of grass,and never had a problem with it being lower then stock.

Team JR, Thunder Tiger America, Scorpion, Skookum Robotics, Savox, RC Aerodyne, Sirocco, SpinBlades
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-06-2012 12:41 AM  7 years ago
Santiago P

rrProfessor

Dayton

MyPosts All Forum Topic
the good ol Mavrikk Supergear for the old R30 and R50 will work perfectly, even if you need to drill new holes.

$12 and is almost indestructible

S
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1155 views Post Reply
Home✈️Aircraft🚁Helicoptere-Thunder TigerRaptor X50E › Raptor G4 landing gear for the X50E
Print TOPIC

 0  Topic Subscribe

Wednesday, October 21 - 5:32 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online