RunRyder RC
WATCH
 1 page 2967 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Scorpion Electric Components › SCORPION 4525-520 with 14s???
12-05-2012 10:28 AM  7 years ago
Topic Vote0Post 1
luckyhs

rrApprentice

Brasil

MyPosts All Forum Topic
SCORPION 4525-520 with 14s???
Guys,

Need some help please, i just finished my new LOGO 700 that comes with the SCORPION 4525-520, i want know if this motor holds 14S, i know the ESC YGE holds, but this motor i don't know, i have asked some friends, and some says YES and others says NO, i want be sure about this, can someone help me please????

Luciano
luckyhs
SHARE  PM  EMAIL  Attn:RR  Quote
12-05-2012 10:40 AM  7 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
The motor is recommended for 12S.Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2012 04:33 PM  7 years ago
Auddiss

rrNovice

CT

MyPosts All Forum Topic
The specs say 12s on scorpions website
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2012 04:40 PM  7 years ago
BrainDrain_dx

rrKey Veteran

Wichita KS

MyPosts All Forum Topic
KDS Agile 7.2/5.5 Chase 360 - SkyHero Spyder/Spy/Little Spyder
Sponsored by my Visa
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-07-2012 06:58 PM  7 years ago
Justin Stuart (RIP)

rrMaster

Plano, Texas

MyPosts All Forum Topic
Try it and see what happens.

I know the motor will run on 6s without any trouble.

I would imagine it could run on 14s too, but you would need to modify your gearing because it will spin faster and (if memory serves me correctly), higher voltage will produce less torque.
Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2012 07:58 PM  7 years ago
MrMel

rrProfessor

Gotland

MyPosts All Forum Topic
You cannot gear it correctly, wrong motor for 14s.

Voltage is never a problem with motors, but the speed it spins becomes the problem, using governor works but in reality you run into mechanical gearing issues before (too small pinion = strips gear)
Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-07-2012 08:20 PM  7 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
Plenty of power on 12s anyway!60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-07-2012 10:50 PM  7 years ago
luckyhs

rrApprentice

Brasil

MyPosts All Forum Topic
KONTRONIK 800-48...
Guys,

I'll give it a try on KONTRONIK 800-48, i do have pinion's 17 and 18 for the LOGO 700, i don't want make tests on the SCORPION 4525-520 with 14S, even with a governor as Mr.Mel said, i don't want force or see what could happens with SCORPION with 14S.
Thanks everybody and let you guys know about the KONTRONIK 800-48.

Luciano
luckyhs
SHARE  PM  EMAIL  Attn:RR  Quote
01-13-2013 08:41 PM  7 years ago
luckyhs

rrApprentice

Brasil

MyPosts All Forum Topic
PROBLEM WITH TAIL WAGS????
Hi Guys,

Have just tried the PYRO 800-48 with YGE 160HV MIKADO EXTREME VERSION in my new LOGO 700, here is my setup:

pinion gear: 17T
14S 65C 4400mahs

I saw some posts that the YGE 160HV MIKADO EXTREME VERSIONS has a limit 132000 2P, where can i identify mine, is there a tag or label on the ESC?
luckyhs
SHARE  PM  EMAIL  Attn:RR  Quote
01-13-2013 09:21 PM  7 years ago
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

MyPosts All Forum Topic
I agree with MrMel, wrong motor for 14s.

In simple terms you need a lower kv motor. If you are running a 12s setup with a 520kv motor you will need a 12s/14s x 520kv = 446kv, say 450kv.

I believe that Scorpion will be bringing out a 450kv 14s motor in the near future.

Cheers,
TomC
Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-13-2013 10:54 PM  7 years ago
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
Thats right Tom..
Got one on back order..
http://www.scorpionsystem.com/news/HK_4530_450/

chuck
Team Synergy Field Representative / Rail Blades / Scorpion Power Systems / HeliLids
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-16-2013 10:55 AM  7 years ago
luckyhs

rrApprentice

Brasil

MyPosts All Forum Topic
Looks good but won't fit!!!!
Hi Chuck,

This motor will looks good, but for my LOGO 700, it won't fit, the shaft diameter is 6MM and the LOGO 700 is 8MM.

luciano
luckyhs
SHARE  PM  EMAIL  Attn:RR  Quote
01-16-2013 11:32 AM  7 years ago
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
May be able to replace the 6mm shaft with this.

http://www.scorpionsystem.com/catal...K_4530_shaft_8/

Or mabey do a special order and see if they will do it at the factory.

chuck
Team Synergy Field Representative / Rail Blades / Scorpion Power Systems / HeliLids
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-08-2013 06:13 PM  6 years ago
ZS-JAF

rrVeteran

Nazareth, PA

MyPosts All Forum Topic
I just threw into the HS calculator 14s and 520KV and I am getting 2200 at 75% for the Diabolo. I want to try this? Gearing does not seem to far off? Is the a potential for failure?I have a 3D heli, I don't understand why it doesn't do 3D.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2967 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Scorpion Electric Components › SCORPION 4525-520 with 14s???
Print TOPIC

 8  Topic Subscribe

Friday, October 23 - 3:44 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online