RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2592 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Gasser Motor choice ?
01-03-2013 08:19 PM  5 years agoPost 21
Carey Shurley

rrElite Veteran

Orlando, FL - USA

My Posts: All  Forum  Topic

k. Asking because the modifiers use a sealant on the gaskets, they normally don't leak after that

Proprietor - Gas Powered Helicopters

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 08:23 PM  5 years agoPost 22
payne1967

rrElite Veteran

uk

My Posts: All  Forum  Topic

do you know what sealant?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-03-2013 08:48 PM  5 years agoPost 23
Carey Shurley

rrElite Veteran

Orlando, FL - USA

My Posts: All  Forum  Topic

yeah its the gasket sealers from the motorcycle companies, both honda and yamaha have a bonding forumla. its probably the same stuff or very similar

Proprietor - Gas Powered Helicopters

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 09:09 PM  5 years agoPost 24
fastflyer20

rrKey Veteran

N. Tonawanda, NY

My Posts: All  Forum  Topic

Yamabond 4 and Permatex Ultra Black work very well, not all sealers are up to the task. It only takes a very thin layer to seal it up.

As a bonus, the Permatex Ultra Black also works excellent for sealing the mufflers, don't use any gasket, just some Ultra Black.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-03-2013 11:53 PM  5 years agoPost 25
Felino

rrApprentice

Mexico city

My Posts: All  Forum  Topic

I use Loctite 515 for crankase and carb as well as Loctite 5920 copper silicone for exhaust both with total succes.
The stock gaskets will always leak sooner than later.
Even though I have never used Yamaha and Honda sealants I think they will work just as good; specialy because they are gasoline proof.

Happy Autos!!

PM  EMAIL  Attn:RR  Quote
01-04-2013 04:54 AM  5 years agoPost 26
rbort

rrProfessor

Franklin, MA - USA

My Posts: All  Forum  Topic

On the lighter side of things...
Did I hear...
Happy Autos!!
???!

YAY!

-=>Raja.

MA 1005 Hanson 280, 4210 flts
Spectra 27 3DMax, 3288 flts
Whiplash V1-2 Hanson 300, 1570 flts
Whiplash V2 Hanson 300, 402 flts

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-04-2013 04:40 PM  5 years agoPost 27
payne1967

rrElite Veteran

uk

My Posts: All  Forum  Topic

my r22 with the g260rc has had a few auto's with the old engine in it
the engine was replaced with a secondhand one after it went bag before a scale fly-in
one day i'll get around to looking at the original motor to see what it needs

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-05-2013 12:48 AM  5 years agoPost 28
S76GUY

rrApprentice

UpState, NY

My Posts: All  Forum  Topic

Hey Guys
After doing a lot of reading and talking with Toxic Al,
It looks like I will be using a G 290 RC for my next motor.
Al said he can tune it to my needs and recommends it for my application.
Thanks again
Tony T.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-05-2013 04:49 PM  5 years agoPost 29
payne1967

rrElite Veteran

uk

My Posts: All  Forum  Topic

the stock g290rc is nice and powerful so a tuned one should be even better

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 2592 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Gasser Motor choice ?
 Print TOPIC  Make Suggestion 

 9  Topic Subscribe

Tuesday, July 17 - 7:16 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online