RunRyder RC
WATCH
 1 page 555 views POST REPLY
HomeScaleAircraftHelicopterScale Model RC Helicopters › sportsmoto head
10-14-2012 08:12 PM  5 years agoPost 1
munkey nuts

rrApprentice

wales uk

My Posts: All  Forum  Topic

ive bought this three bladed head, it says on the website that the phaseing is built in so need for a swash follower. what i want to know is if you have left hand or right hand rotation is the phasing the same or is it different?

gaz

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2012 10:04 PM  5 years agoPost 2
Viggen65

rrVeteran

Gothenburgh, Sweden

My Posts: All  Forum  Topic

Looking on mine sportsmotohead there shouldnt be a problem,since the bladeholders are equal om both side just flip them over and put the 90 degree links facing left seeing from the top.

Cheers
Jack

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2012 10:31 PM  5 years agoPost 3
munkey nuts

rrApprentice

wales uk

My Posts: All  Forum  Topic

Thanks.
When attaching the blade grip holders to the head there is one bolt with lock nut. Do you clamp that together tightly or is it meant to be loose to move freely.

Gaz

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2012 10:39 PM  5 years agoPost 4
Viggen65

rrVeteran

Gothenburgh, Sweden

My Posts: All  Forum  Topic

As tight as possible but it should move freely.

/jack

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2012 10:43 PM  5 years agoPost 5
munkey nuts

rrApprentice

wales uk

My Posts: All  Forum  Topic

sorry,there is the bit that fits directly to the head that has the bearings inside then there is the actual blades grip holder that bolts on to that, on mine it came with a silver bolt and nut?

how does it fly, it seems well made.

thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
10-15-2012 07:02 AM  5 years agoPost 6
Viggen65

rrVeteran

Gothenburgh, Sweden

My Posts: All  Forum  Topic

Hm.. Dont really understand which bolt you mean,if it is the bolt that are holding the piece where you attach the maingrip holder mine was black supplied with a nylon locknut,the bladesgrips attaches to this with a lot of hexnuts....i think you should contact markat sportsmoto if problems occur,i havent testflown mine yet but looking forward to it.

Cheers
Jack

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 555 views POST REPLY
HomeScaleAircraftHelicopterScale Model RC Helicopters › sportsmoto head
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, August 14 - 10:18 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online