RunRyder RC
WATCH
 1 page 963 views POST REPLY
10-11-2012 03:20 PM  6 years agoPost 1
nyrican

rrNovice

chesapeake, VA

My Posts: All  Forum  Topic

I built a new velocity 50N2 and having problem with clutch bell. I have engine running at idle speed to the lowest i can get it without engine turning off and is not reving high at all sound like my other heli i had at idle speed but my blades are still moving. is there something i have to do with the clutchbell.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2012 04:17 PM  6 years agoPost 2
BigMc70

rrApprentice

Abilene, Texas-USA

My Posts: All  Forum  Topic

Check your engine alignment with the clutch. You shout be able to turn the starter shaft that accepts the 6mm wand freely the oneway in the clutch will hold the shaft kinda firm but you should be able to turn it with out it getting tight then loose then tight again. Also check the clutch liner in the bell you should have a gap big enough to put two wraps of notebook paper around the clutch and fit in the bell if not you might have to chuck the bell in a drill and sand the liner a little at a time till the fit is right. I built the N2 earlier this year and have not had a problem thus far. Good luck and keep us posted.

Raymond McFaul
Team Grand RC

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-12-2012 01:03 AM  6 years agoPost 3
nyrican

rrNovice

chesapeake, VA

My Posts: All  Forum  Topic

it as the clutchbell was to tight there was no spacing between the hex adapter and bearing. it working now so hope that i corrected it properly

PM  EMAIL  GALLERY  Attn:RR  Quote
10-12-2012 02:36 AM  6 years agoPost 4
BigMc70

rrApprentice

Abilene, Texas-USA

My Posts: All  Forum  Topic

Enjoy the heli its truly a great helicopter.

Raymond McFaul
Team Grand RC

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 963 views POST REPLY
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, October 18 - 6:45 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online