RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1299 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Spektrum DSM › 7s using a ar7100r when i cut gyro on throttle stops going to full throw
10-10-2012 09:54 PM  5 years agoPost 21
joe9959

rrNovice

huntsville al, usa

My Posts: All  Forum  Topic

ds7 ar7100r
This is joe im reading and trying most of every thing but i cant get it the reciever in set up mode im going to try the frame rate tonight and hope that gets it. I would chime in more but i have no idea what im doing im just thankful for all of your help ans im going to keep tring. If i just re assign gyro and gov the throttle only moves to half throttle. i think until i get the rec reset im stuck.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2012 02:51 AM  5 years agoPost 22
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

but i cant get it the reciever in set up mode
What do you mean by this? Which set up mode can't you get to in the receiver?

I'll work with you till we get this figured out.

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2012 04:17 AM  5 years agoPost 23
joe9959

rrNovice

huntsville al, usa

My Posts: All  Forum  Topic

set up mode
I got the ar7100r talking to dx7s finaly. The set up mode is to show the rec full thro on the throttle stick. after i set tx at 11ms you set normal at 100 and stunt at -100 and turn on tx and then rec and toggle gov or stunt switch then the green light on rec flashes then you move thro stick from the lowest setting to full throttle then un plug rec.

I did this finaly after getting 11ms changed. now i dont know what to do ive nev used a rev lim other than gv1 I have 100 in normal do i leave that and set thro curve then i have -100 in stunt i assume that one or both need to set were i want my limmiter to lim and what rpm. Its in a vibe 500 fbl head hyper 50.

Sorry im not up on spectrum stuff im just getting back in to flying after a 7 year lay off and so much has changed.

Thanks to every one that helped youll are great.
And very Helpful.
I hope i can help you all some day.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2012 05:28 AM  5 years agoPost 24
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Here is a link to a fairly good explanation of what the Rev Limiter does, and how to go about setting up your throttle curves on the radio:

http://www.modelavionics.com/revmax.asp

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2012 07:25 AM  5 years agoPost 25
aerocal

rrApprentice

Central California

My Posts: All  Forum  Topic

Dave I think your missing the radio to try it out on .
Once you play with the menu a bit you will see that it works fine.
If you have a club field nearby I cant imagine you wouldnt see someone there with one.

Joe got it working.
Im sure he will let us know if he needs anymore info.
Thanks joe.Glad to help.
Between what I told you in PM and the RevMax page you should be bale to figure it out.The 7100R basically has the RevMax package built into the Rx.
Thanks to John Adams for the reminder about trying 11ms.I only ran into this once before but mine dont seem to have that issue @22.Something Ill keep fresh in my memory now.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2012 01:01 PM  5 years agoPost 26
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

There seem to be a lot of old DX7 radios, DX6i radios, and DX8 radios around here. Finding a DX7s hasn't been easy! There are a couple NIB at the LHS, but they don't have an AR7100 to check it out on.

The 11 ms thing seems weird, since the radio works just fine when you team it up with any other DSM2-based transmitter that only supports the 22 ms frame rate. I'd like to know what's magic about 11 ms as radios such as the X9303, old DX7..., are completely happy with the AR7100. It couldn't be DSMx-related, as the AR7100 is a DSM2 receiver.

What magic is going on with the AR7100, 11 ms, and the DX7s?

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1299 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Spektrum DSM › 7s using a ar7100r when i cut gyro on throttle stops going to full throw
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, September 25 - 5:46 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online