RunRyder RC
WATCH
 1 page 1097 views POST REPLY
HomeClassifiedAircraftHelicopter
e-
Classifieds - Elec Helicopters
 Sold  SOLD: Logo 600SE airframe, 3 canopies, and parts!
09-30-2012 01:57 AM  6 years agoPost 1
Kiba

rrApprentice

CA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

SOLD 10/7

Decided I like the Goblin better than the Logo 600SE so I'm parting out the 600SE. What's next? Probably a Bergen Magnum 44 turbine...

Please PM me for contact as I don't check my for sale posts often and at least with a PM I receive a pop-up notification.

Up for sale is my Logo 600SE airframe. The heli has 332 flights on it total and about 120 or so since the last crash in which it was completely rebuilt. Every bearing was replaced or repacked the last go around using the Greaser, new dampers, new belt, etc. It's in perfect flying condition-- I put my last 4 flights on it this morning.

The heli is currently configured with a custom 3 bolt 25mm motor mount and Mikado 25mm counterbearing modified to work with the 3-bolt motor mount; the factory Mikado 25mm and 30mm motor mounts are also included.

The heli also has the Mikado carbon boom installed as I got tired with constantly adjusting belt tension every time I took it out with the aluminum boom because of temperature changes. With the carbon boom the belt tension stays perfect over a very broad temperature range.

3 canopies are included; one made in Germany Mikado green/blue and 2 Fusuno canopies. All are in very good condition and have RevCo canopy magnets glued on the back.

The tail was replaced with an RJX tail hub & grip assembly, RJX pitch slider, and RJX pitch control lever; I wasn't comfortable spinning 105's with the stock tail. Mikado carbon futaba servo arms are currently attached to the 3 swash links and the tail control rod.

The swashplate is from I2 and really, really nice; stronger and less slop than the stock Mikado piece. This was purchased as the original swash was slightly tweaked in the crash about 120 flights ago and at the time readyheli was out of stock of the Mikado swashes. I'm glad because the I2 piece is much nicer!

I'm a spare parts fiend that stocks up during holiday sales so a bunch of spares are included too... here's the list.

Mikado parts new in bag:
1x 01574 pivot balls
1x 01570 pivot balls
1x 01572 pivot balls
1x 04192 pivot balls.
1x 00915 main blade grips
2x 04183 main gear
1x 01919 bolts
1x 01961 bolts
3x 01974 main blade bolts & nuts
1x 02074 nuts
1x 03046 anti-static pulley
3x 03092 extra hard dampers
2x 00841 main grip thrust bearing spacers
1x 02385 mainshaft clamp
2x 04107 tail shaft spacer kit
3x 01344 c-clip
1x 02010 mainshaft spacers
1x 02009 mainshaft spacers
1x 00845 pack of 2 feathering spindles
1x Mikado 600SE kevlar tail belt
2x 00930 idler pulley bearings
1x 01329 main bearings
2x 00954 main grip bearings
2x 03069 flanged tail bearings

RJX & Misc parts new in bag:
2x KSJ boom braces
2x RJX pivot balls
1x RJX tail pivot arm
2x Complete RJX tail assemblies (in addition to what is on the heli)
1x RJX pitch control lever
2x RJX pitch sliders
1x RJX pitch control hub
4x RJX tail hubs

Misc used parts & tools:
Swash leveller
30mm Mikado motor mount
25mm Mikado motor mount
25mm Mikado counterbearing
Mikado headblock & yoke
Original Mikado tail assembly & pitch slider (never flown)
Aluminum boom
11T and 12T pinions
Misc screws, nuts, blade spacers, etc.

Asking $550 shipped for everything. I also have the following for sale I was flying on this heli and will combine shipping if you're interested...

Jive 80HV
Xera 4035-3y-400
BLS451 and BLS251 Servos
12S 4000 packs on carbon/aluminum trays

PM  EMAIL  Attn:RR  Quote
10-04-2012 05:32 PM  6 years agoPost 2
Kiba

rrApprentice

CA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bump, lower price.

PM  EMAIL  Attn:RR  Quote
10-06-2012 09:41 PM  6 years agoPost 3
Kiba

rrApprentice

CA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bump!

PM  EMAIL  Attn:RR  Quote
10-07-2012 10:54 PM  6 years agoPost 4
timz

rrNovice

San Jose, CA, USA

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Thanks for the great deal

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1097 views POST REPLY
HomeClassifiedAircraftHelicopter
e-
Classifieds - Elec Helicopters
 Sold  SOLD: Logo 600SE airframe, 3 canopies, and parts!
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Monday, October 15 - 12:28 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online