RunRyder RC
WATCH
 1 page 1391 views POST REPLY
Home✈️Aircraft🚁Helicoptere-SABOther › Hard mounted servos ??
09-24-2012 11:02 AM  7 years ago
Topic Vote0Post 1
bigbadflyer

rrVeteran

Middle Earth New Zealand

MyPosts All Forum Topic
Hard mounted servos ??
Are you guys using the rubber grommets and little metal inserts on your servos or are you just hard mounting your servos to the mounts. I remember seeing/reading about people not using the rubber bits anymore.
Thanks
New Zealand Helicopter Sheep Hearding Champion :-)
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-24-2012 12:43 PM  7 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
💎Sustaining Member
I leave them out on electrics.Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-24-2012 02:15 PM  7 years ago
rstacy

rrElite Veteran

Rochester, NY

MyPosts All Forum Topic
I am from the old school.
Other than 450 size helicopters, I never hard mount a servo.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-24-2012 02:21 PM  7 years ago
Nycatt

rrElite Veteran

New York

MyPosts All Forum Topic
I agree with Ray. The rubber grommets and inserts act as absorbers for vibrations, heavy loads and might save the servo ears in the event of a crash.


Team Synergy
Rail Blades
MKS Servos
Thunder Power
Vteam
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-24-2012 02:33 PM  7 years ago
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
Rubber grommets hereTeam MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-24-2012 03:39 PM  7 years ago
Mike Wilson

rrVeteran

Toronto, Canada

MyPosts All Forum Topic
Same here.Teambob00
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-24-2012 04:40 PM  7 years ago
USNAviationjay

rrElite Veteran

Houston Tx USA

MyPosts All Forum Topic
with the Torqs you actually have to use them as they act as a spacer.
but yes always use them.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-24-2012 04:57 PM  7 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
I never even considered hard mounting a servo.Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-24-2012 08:12 PM  7 years ago
bigbadflyer

rrVeteran

Middle Earth New Zealand

MyPosts All Forum Topic
6 with and one without. Thanks guysNew Zealand Helicopter Sheep Hearding Champion :-)
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-25-2012 02:03 AM  7 years ago
taosgraveyard

rrNovice

Connecticut

MyPosts All Forum Topic
Depends...
I do whatever it takes to line up the rods to the awash. I want these to be perfectly parallel to the main shaft at zero pitch

On my goblin 700 using the torque HV servos I had to use the rubber things or the rods would not have been parallel to the main shaft

Other servos might 'have out of true' runs to the swash when the rubber things are used
SHARE  PM  EMAIL  Attn:RR  Quote
12-01-2012 02:55 AM  6 years ago
praztek

rrApprentice

brandon , fl

MyPosts All Forum Topic
Anyone know where I can buy the metal inserts, they are missing from three of the torque servos bought from another forum member.

Thanks
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1391 views POST REPLY
Home✈️Aircraft🚁Helicoptere-SABOther › Hard mounted servos ??
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Wednesday, October 16 - 10:13 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online