RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 1737 views TOPIC CLOSED
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityOutrage › First Velocity 50 flight... main gear stripped... how come?
08-06-2012 07:28 PM  5 years agoPost 1
Rojoalfa

rrVeteran

Punta de Mata, Monagas-Venezuela

My Posts: All  Forum  Topic

/
/

Don´t get it!... first flight and main gear has stripped due to...?

Main gear excentric... a little bit...

/

Saludos cordiales,

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
08-06-2012 08:02 PM  5 years agoPost 2
USNAviationjay

rrElite Veteran

Houston Tx USA

My Posts: All  Forum  Topic

too much backlash most likely.. The Velocity doesn't normally have gear stripping issues on the main.

PM  EMAIL  GALLERY  Attn:RR
08-06-2012 08:15 PM  5 years agoPost 3
Rojoalfa

rrVeteran

Punta de Mata, Monagas-Venezuela

My Posts: All  Forum  Topic

/
/

I did the spacing, using a "bond paper" slice between gears.

Probably the 4 bolts break loose...

Let me check...

/

Saludos cordiales,

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
08-17-2012 05:49 PM  5 years agoPost 4
Rojoalfa

rrVeteran

Punta de Mata, Monagas-Venezuela

My Posts: All  Forum  Topic

I Don´t get it!
/
/

Well, let me explain...

Holes on both frames are circular on motor base. There is no way to move motor base.
So, it is fixed.

On the other hand, there is no way to move "clutch bearing block assy" if motor base can´t.

How can I change "backlash" on Velocity 50 heli?

I Don´t get it!

/

Saludos cordiales,

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
08-18-2012 12:15 AM  5 years agoPost 5
Foxden

rrElite Veteran

Port Charlotte, FL. USA

My Posts: All  Forum  Topic

The Velocity 50 engine stack/clutch assembly frame holes are slotted, push everything to the rear for the stock gear, and everything to the front for the optional 8.6 gear.

is this the old Vel 50 or the new N2?

Clyde Fox
Port Charlotte FL
Team Outrage

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
08-21-2012 03:56 PM  5 years agoPost 6
Rojoalfa

rrVeteran

Punta de Mata, Monagas-Venezuela

My Posts: All  Forum  Topic

/
/

The old one...

Only clutch assembly frame holes are slotted.

I think I need to "dremel" motor base holes to do so...

Same as thunder tiger raptor... no slotted holes.

/

Saludos cordiales,

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 1737 views TOPIC CLOSED
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityOutrage › First Velocity 50 flight... main gear stripped... how come?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, June 24 - 11:38 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online