RunRyder RC
WATCH
 1 page 999 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoLogo 500 › Head speed logo 500
08-05-2012 03:30 PM  9 years ago
Topic Vote0Post 1
crunch

rrApprentice

Peterborough, England

MyPosts All Forum Topic
Head speed logo 500
Hi every one

What head speed are you running on logo 500 3d

And what pinion are you on, I have scorpion 4025 1100 motor.

I want good 3d power.

Thanks paul
SHARE  PM  EMAIL  Attn:RR  Quote
08-06-2012 04:56 AM  9 years ago
gologo

rrKey Veteran

Sedalia, Mo USA

MyPosts All Forum Topic
If you are running the mod 7 maingear, 15-16t would
put you about where you want to be.

Edit--- forgot to mention, go to Mr Mels H/S calculator on Ready
Heli site. You can play w. different pinions, motors, etc, and get
a pretty good idea of what you want;
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-06-2012 07:28 AM  9 years ago
crunch

rrApprentice

Peterborough, England

MyPosts All Forum Topic
Thanks
SHARE  PM  EMAIL  Attn:RR  Quote
08-07-2012 01:18 AM  9 years ago
GabrielB1231

rrApprentice

CA

MyPosts All Forum Topic
If you are using the mod 7 maingear I would try a couple. This is the range i would start with 14-16 t pinion. That will get You to Hard 3D Power. Try a 15 that is what my buddy is using. He has Alot of power with the same motor you have. Good luck.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 999 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoLogo 500 › Head speed logo 500
Print TOPIC

 3  Topic Subscribe

Friday, September 17 - 4:25 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online