RunRyder RC
 10  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4359 views POST REPLY
HomeAircraftHelicopter
e-
SAB
Goblin 630 › Goblin 630
08-12-2012 11:27 PM  5 years agoPost 21
Mike Wilson

rrVeteran

Toronto, Canada

My Posts: All  Forum  Topic

Although .8mm made the head almost as stiff as the 700, I was getting a lot of wobble and had to reduce the shim to .4mm on each side. The head is not as stiff as I would like but I think it should stillbe fine for the time being.

Teambob00

PM  EMAIL  GALLERY  Attn:RR  Quote
08-23-2012 07:47 PM  5 years agoPost 22
s0laris

rrApprentice

calgary,ab,canada

My Posts: All  Forum  Topic

has there been any word from sab on this issue ?

I just built my 630. the head feels super tight with just the factory shim.

When i went to take apart the head I needed to bake it to get the bearings to pop out so i could check thrust bearings for grease, etc..

the dampers are very tight in the block, but i heard stories of dampers just falling out easily..

PM  EMAIL  Attn:RR  Quote
08-23-2012 08:28 PM  5 years agoPost 23
Mike Wilson

rrVeteran

Toronto, Canada

My Posts: All  Forum  Topic

Check them after the first few flights. make sure you remove the links from the swash when checking the dampening.

I had my checked by the Goblin designer and he said that it was fine with a second .2mm shim installed. When it was first built, it was still with just a single .2mm shim as well. I've been flying it with no issues so far.

...Mike

Teambob00

PM  EMAIL  GALLERY  Attn:RR  Quote
08-24-2012 04:11 PM  5 years agoPost 24
dlbell (RIP)

rrVeteran

Detroit, MI

My Posts: All  Forum  Topic

Just got mine!!!!!
I just got my 630 and I'm finishing the build this weekend. Here's my setup:

Scorpion 4225-550 Motor
Castle 160HV ESC

JR 8917hv's on cyclic
JR MP80G on tail

Spektrum AR7200BX Flight control

Pulse Ultra 6s 3700's

and a DX18.

I can't wait to fly this one...

Big D.

www.midamfunfly.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-24-2012 11:04 PM  5 years agoPost 25
Mike Wilson

rrVeteran

Toronto, Canada

My Posts: All  Forum  Topic

Glad to see that you're almost finished the build D. I just got back from the field and put another 5 flights on my 630. Still going strong and loving it after 30 flights.

...Mike

Teambob00

PM  EMAIL  GALLERY  Attn:RR  Quote
08-25-2012 03:13 PM  5 years agoPost 26
s0laris

rrApprentice

calgary,ab,canada

My Posts: All  Forum  Topic

hopefully i can maiden 630 this week (waiting on servos)

700 has 120+ flights at 2070 rpm and going strong!

PM  EMAIL  Attn:RR  Quote
08-26-2012 08:18 PM  5 years agoPost 27
Nycatt

rrElite Veteran

New York

My Posts: All  Forum  Topic

Has anyone tried GenAce 4000mah on the 630 with the tray set for 60mm battery spacing.




Team Synergy
Rail Blades
MKS Servos
Thunder Power
Vteam

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-02-2013 07:00 AM  5 years agoPost 28
s0laris

rrApprentice

calgary,ab,canada

My Posts: All  Forum  Topic

Hope fully i can maiden my 630 this spring

I need a life....

PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4359 views POST REPLY
HomeAircraftHelicopter
e-
SAB
Goblin 630 › Goblin 630
 Print TOPIC  Make Suggestion 

 10  Topic Subscribe

Monday, June 25 - 8:54 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online