RunRyder RC
WATCH
 1 page 1081 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Battery-Charger-pSupply › Why my charger said Bal Over or Over Voltage
08-02-2012 11:37 PM  9 years ago
Topic Vote0Post 1
Tommy8275

rrVeteran

Mount Juliet, TN

MyPosts All Forum Topic
Why my charger said Bal Over or Over Voltage
Why when I charded my batteies it said Bal Over or over voltage? it only happen with this pack Pulse 6s 5000mah 45c, other batteies work fine
Tommy K
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2012 11:48 PM  9 years ago
TheWoodCrafter

rrKey Veteran

Chiloquin, OR

MyPosts All Forum Topic
So which is it, Bal Over or Over Voltage?

I would think they mean 2 different things.

And what charger are we talking about here?
Thanks, TheWoodCrafter
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2012 11:58 PM  9 years ago
Tommy8275

rrVeteran

Mount Juliet, TN

MyPosts All Forum Topic
If I charge with my balance conect it said Bal Over. If I charge without balance cable connect it said Over VoltageTommy K
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 12:16 AM  9 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
And what charger are discussing ??Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 01:10 AM  9 years ago
TheWoodCrafter

rrKey Veteran

Chiloquin, OR

MyPosts All Forum Topic
And what charger are discussing ??
We still don't know that.
I think he is making us guess.
Thanks, TheWoodCrafter
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 01:12 AM  9 years ago
Tommy8275

rrVeteran

Mount Juliet, TN

MyPosts All Forum Topic
I used with Icharger 3010B and Volt 101K also I tried TP chargeer but on TP it said voltage too high.Tommy K
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 01:47 AM  9 years ago
TheWoodCrafter

rrKey Veteran

Chiloquin, OR

MyPosts All Forum Topic
So what was the voltage?Thanks, TheWoodCrafter
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 02:04 AM  9 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
Maybe the charger is not reading the number of cells correctly ?Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 03:44 AM  9 years ago
Tommy8275

rrVeteran

Mount Juliet, TN

MyPosts All Forum Topic
26.3 volt

Each cell read. 4.23
Tommy K
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 03:57 AM  9 years ago
rcflyerheli

rrKey Veteran

Granbury, TX USA

MyPosts All Forum Topic
If that is correct, that's not good. You should only be reading 25.2 on a fresh charged pack. Do you have a voltmeter that you can check the pack voltage?

If you are just plugged into the balance port, and the pack cells are balanced, then I would think the charger should stop and say the pack is balanced. Your pack could be reading too high a voltage and still be balanced.
Logo 700, Specter 700, Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 05:01 AM  9 years ago
TheWoodCrafter

rrKey Veteran

Chiloquin, OR

MyPosts All Forum Topic
It looks like those messages were not in error.

Now how did the pack get over charged?
Thanks, TheWoodCrafter
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 07:05 AM  9 years ago
rcflyerheli

rrKey Veteran

Granbury, TX USA

MyPosts All Forum Topic
I would run a load on the pack to reduce the voltage, and maybe try it on a different charger. If you can do a storage charge or decharge to bring it down to 3.8 volts/cell, and then try to recharge and check what the cells do, that should give you some idea if the pack is toast.

I know what you are going through. I screwed up my PL8 2 days ago by plugging in a pack backwards, and my second charger just smoked itself tonite running a storage cycle on my packs. So I am down until I get a replacement and get my PL8 repaired.

Good luck with your pack.
Logo 700, Specter 700, Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 04:50 PM  9 years ago
Tommy8275

rrVeteran

Mount Juliet, TN

MyPosts All Forum Topic
Thank guy I will run this pack down and recharge back see how it doing.Tommy K
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2012 09:27 PM  9 years ago
Tommy8275

rrVeteran

Mount Juliet, TN

MyPosts All Forum Topic
After I ran a load on the pack to reduce the voltage. now my pack is charge normally and balance perfectly. Thank guyTommy K
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1081 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Battery-Charger-pSupply › Why my charger said Bal Over or Over Voltage
Print TOPIC

 3  Topic Subscribe

Monday, September 20 - 9:54 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online