RunRyder RC
WATCH
 1 page 1030 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬e-Classifieds - Elec Helicopters Sold  GAUI X5 FES FBL BNF /w Blue Mini VBar 5.3Pro
07-31-2012 01:55 PM  9 years ago
Topic Vote0Post 1
Chris Sexton

rrApprentice

Columbus, OH

MyPosts All Forum Topic
GAUI X5 FES FBL BNF /w Blue Mini VBar 5.3Pro
Fleet is ever growing and I got the chance to pick up a 2011 TDR kit for a great price. I Truly love my X5 and will build another when funds allow, but I need to sell this to afford the electronics on the TDR.

This is a NEW kit purchased from HeliProz.com not 2 months ago. Kit has about 50 flights on it. All the upgrade parts were purchased at Anythingheli.com the same day. All parts were new when installed on this air frame. I have a backup air frame assembled out of spares but I am going to keep those so I can one day rebuild an X5 as funds permit. This is the NEW bird not the spares bird. If you know me you know I rave about my X5 and truly take great care it. I hate to part with it, but owning a TDR has been a goal for some time and while I wasn't planning to build until winter, I couldn't pass up the deal on the air frame.

Here is what you get:
GAUI X5 FES Kit with Motor/ESC/Blades - $618.99
-GAUI (hobbywing) 100A ESC
-Scorpion 4020-910kv
-GAUI 520mm CF Mains V3 (notched tip version)
Edge 86mm CF Tails - $24.99
GAUI Frame Stiffener Kit with Battery fence - $17.99
GAUI CNC Helical Main Gear 120T - $31.99
GAUI Bevel Cut 15T Pinion - $13.99
MKS DS1009MG Cyclic Servos - $39.99 each
OutRage BL9188 Tail servo - $139.99
Blue Line Mini V-Bar FBL Controller with Pro 5.3 upgrade - $344.99
(2) Spektrum DSMX Remote Sats - $34.99 each
(2) Glacier (EP BUDDY) 35c 6S1P 4000mAh packs - $89.99 each

Total invested: $1,562.86

I know what you are going to say, why those cheap MKS cyclics? Do a little research. Those are possibly the most under rated servo on the market. Completely metal gear train, .10 @6v with 138oz/in torque. With an aluminum body for cooling. I have ran these on several Fusion 50s and this X5 with NO problem. The set I had in my last F50 had over 100 flights and NO GEAR SLOP at all. Great cyclic servos. When I am not going HV on a 700, I will always use these as long as I can find them in stock.

Glacier Packs: These are a relatively new import to the US by EP Buddy. They are rumored to come off the same line as Gens Ace. I can tell you have several sets of these and they are brick hard well into 50+ flights on my E7 and X7.

Why the Outrage tail servo? Well as I am progressing, i am learning the value of a good tail servo. Even at only 6V this thing has great stats and is rock solid in both a hover and FFF sport flying. I used to have a crazy slow wag with the stock GAUI tail servos. Completely stable now.

I did a couple upgrades to this kit along the way. I run the Frame Stiffener and Battery fence, just makes sense keeps the battery from impacting the motor in a nose in crash. It also give you a great tool to get CoG right every time. I also run the GAUI CNC Helical cut Main gear and 15T pinion. Much quieter gear train, this bird is very quiet compared to my larger straight cut gear birds. I do have the stock gear and pinion which I will include.

Batteries and ESC have deans on them, but if you prefer EC5, i can switch prior to shipping.

PM with questions. I don't have pictures yet, but I will post up some when I get home if it isn't sold by then. I don't have a lot of feed back here, but I have tons on the other forum under the same username. Check out my Feedback. I am an experienced builder and, to my knowledge, no one has ever been disappointed with one of my builds.

Asking price: $800 shipped CONUS and I will pay PayPal fee.
Chris Sexton
Synergy Factory Specialist / Team Scorpion
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2012 02:24 PM  9 years ago
Chris Sexton

rrApprentice

Columbus, OH

MyPosts All Forum Topic
Got a question about the electronics. Yes they are all brand new for this kit. All the used parts from my old X5 were sold with another bird.Chris Sexton
Synergy Factory Specialist / Team Scorpion
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2012 03:30 PM  9 years ago
Chris Sexton

rrApprentice

Columbus, OH

MyPosts All Forum Topic
Pics










I forgot a few things. I did install KBDD Lime green dampeners. As well as the metal boom support clamp. I have the stock parts to include as well. 
Chris Sexton
Synergy Factory Specialist / Team Scorpion
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2012 03:40 PM  9 years ago
shihan

rrApprentice

Oneida, N.Y.

MyPosts All Forum Topic
Gd
Great deal...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2012 06:09 PM  9 years ago
Chris Sexton

rrApprentice

Columbus, OH

MyPosts All Forum Topic
SOLD Pending FundsChris Sexton
Synergy Factory Specialist / Team Scorpion
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2012 08:38 PM  9 years ago
Chris Sexton

rrApprentice

Columbus, OH

MyPosts All Forum Topic
Payment received.Chris Sexton
Synergy Factory Specialist / Team Scorpion
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1030 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬e-Classifieds - Elec Helicopters Sold  GAUI X5 FES FBL BNF /w Blue Mini VBar 5.3Pro
Print TOPIC

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Sunday, September 26 - 1:31 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online