RunRyder RC
WATCH
 1 page 925 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬e-Classifieds - Elec Helicopters Sold  For sale or WTT 2rtf helis for a trex500 or a multirotor
07-31-2012 04:16 AM  9 years ago
Topic Vote0Post 1
donandtheresa

rrNovice

Peoria, Az

MyPosts All Forum Topic
For sale or WTT 2rtf helis for a trex500 or a multirotor
I am selling my smaller helicopters as I do not get to fly them much anymore. The first one is a Dynam Erazor 450 Carbon Fiber edition. It has alot of upgrades to it with alot of extra parts. The 3 cyclic servos are upgraded to Tarot helicopter metal gear digital servos(MD933) and the tail servo has been upgraded to a Futaba 9257 digital tail servo. I also replaced the stock gyro with a Assan 250 gyro. The esc has been upgraded to an Align brushless 35 amp. The head is also upgraded to a blue metal head, and the tail was also upgraded to an Align 450 metal tail assy. I do currently have the photography landing gear( had to beef up the lower frame to support it) on it as I used to fly it with a camera under it, but I am including a new set of landing gear incase you wish to go back to stock. I also included all the stock pieces I upgraded incase you would like them. This heli is BnF as I have installed an orange box receiver. This allows it to be bound to any spektrum 2.4 GHz transmitter, I was using a DX6i with it. I am including extra blades( tail and main(carbon fiber), three 11.1 2200MaH 40/90c batteries, new in package main gear set, swash plate, and belt. Two 450 tail booms, another head and tail assy from hobby king, 2 new main shafts, another 450 canopy, I am included the Tarot flybarless head with a spare for parts for this heli. quite a few other misc parts that are for this helicopter, and I will also include the original 6 channel reciever and transmitter. I did have the flybarless set up on this heli and it was great but I needed the flybarless controller for another heli I have, and because you need the controller to go flybarless I put the flybarred head assy back on it. If you want flybarless you just need to buy the controller for it. I know that parts were hard to find for this heli at first but I have been finding all the stock carbon fiber parts I needed from Wowrcmodel.com at a nice price too. Also included in this listing is my Eflite Blade MCP x. This heli is also a BnF, I had this setup on my DX6i. I have also done a ton of upgrades on this bird too. The upgrades are: BRUSHLESS CONVERSION KIT-P: HP05 BL Main, StvPCB,XP-7A, MH-MCPX005X-S Carbon Frame w/ 3rd Bearing, Upgraded 120 Brush Tail (Red) for MCPX/MCPX2, MHE-MH-MCPX006VS: Aluminum/Carbon Fiber Landing Gear "V" w/ Support - Blade MCPX/MCPX2, XTM-MCPX001-S: Metal Blade Grip w/ Angular-Contact Bearings (Silver) for E-Flite Blade mCPX/mCP X2, XTM-MCPX002-S: Metal Main Rotor Hub (Silver) for E-Flite Blade mCPX/mCP X2, XTM-MCPX003-S: Metal Swash Plate (Silver) for E-Flite Blade mCPX/mCP X2, KBDD5000: KBDD Extreme Edition Main Blades (Bright White) for Blade MCP X/mCP X2, MHE-MH-MCPX005CM: Carbon Canopy Mount Set (for MH-MCPX005/B/X) - Blade MCPX/MCPX2, MIA-MCPX-COMBO-BLUE: MIA Phanton Combo Kits for the Blade mCPX/mCP X2 Helicopter, RKH-MCP-XT01-S (Silver): Precision CNC Aluminum Swash Leveler for Blade MCP X/mCP X2. I am including all the stock pieces with this as well as seen in the pictures. Along with the 2 stock batteries and 5 nanotech 300 MaH 30c batteries. The tail booms in the pictures are bent or broke but I saved them because the motors are good in them, one is the stock motor the other is the sr120 upgrade motor. 2 different types of tail rotors also the red upgrade tail rotor then a larger white upgrade tail rotor which I found works better, just need to trim about 2 mm off the ends to prevent tail - main blade contact. If won I will take off the tail boom and blades on the 450 for easier shipping. If you do not have the spektrum transmitter I would be willing to sell my DX6i( that is already programmed for these 2 helis) for an extra $150.00. I also wanted to added that with any air type RC they have been in accidents, but they also have been rebuilt back to flying condition. Crashing is just part of the learning curve with helis. Also with any type RC, even new ones there is no warranty. I am not sure what all of it is worth, but I am hopping to see $550.00 shipping included to the CONUS. As far as splitting the items up I would like to give it a week and see if anyone would like to buy the whole lot. Once sold I will remove the boom and head of the 450 for easier shipping. Thanks for looking.
I would also be willing to trade for a 500 or larger helicopter or a multirotor.

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2012 03:38 AM  9 years ago
donandtheresa

rrNovice

Peoria, Az

MyPosts All Forum Topic
bump
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-08-2012 05:29 PM  9 years ago
donandtheresa

rrNovice

Peoria, Az

MyPosts All Forum Topic
Bump willing to trade all this for a 500 or larger heli
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2012 12:11 AM  9 years ago
donandtheresa

rrNovice

Peoria, Az

MyPosts All Forum Topic
bump
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-10-2012 06:30 PM  9 years ago
donandtheresa

rrNovice

Peoria, Az

MyPosts All Forum Topic
sold pending trade
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 925 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬e-Classifieds - Elec Helicopters Sold  For sale or WTT 2rtf helis for a trex500 or a multirotor
Print TOPIC

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Wednesday, September 22 - 5:42 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online