RunRyder RC
WATCH
 1 page 480 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsBeastX › Powering BeastX with perfect regulator
07-31-2012 03:47 AM  9 years ago
Topic Vote0Post 1
craig1980

rrApprentice

lafayette, indiana usa

MyPosts All Forum Topic
Powering BeastX with perfect regulator
I just got my dad a used 600 le and it has a BeastX with a PerfectRegulators 4.8-8.5v CCPM system. I have the regulator set to 6v. My question is do I just rely on the power from the servos coming from the regulator to the Beastx then to the receiver. Or should I set up a secondary way to provide power? I really can't figure out another way to do this. Just a note servos are Align 610 battery is a 2s 3600. I will admit this has me confused. I run a life pack on mine and have never used a regulator.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2012 11:46 AM  9 years ago
craig1980

rrApprentice

lafayette, indiana usa

MyPosts All Forum Topic
I submitted the question to perfect regulators and got a quick response. Looks like the power comes from 3 wires from the regulator. These are the wires that connect to the cyclic servos and the cyclic servo wires provide the power the fbl/rx.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 480 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsBeastX › Powering BeastX with perfect regulator
Print TOPIC

 0  Topic Subscribe

Sunday, September 19 - 3:52 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online