RunRyder RC
WATCH
 1 page 597 views Topic Closed
07-29-2012 04:00 AM  8 years ago
Topic Vote0Post 1
FLYERCLD

rrVeteran

Proctor, Arkansas

MyPosts All Forum Topic
Servo Arms/Wheels
I need some help finding heavy duty servo arms and wheels that meet the requirment for the whiplash. Cyclic 19mm and 14mm rudder. I fly Savox servos.

Thanks,
Charles
Old pilots never die they just fade away
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-29-2012 04:28 AM  8 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
SHARE  PM  EMAIL  Attn:RR
07-29-2012 03:16 PM  8 years ago
FLYERCLD

rrVeteran

Proctor, Arkansas

MyPosts All Forum Topic
Thanks for the info.Old pilots never die they just fade away
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-29-2012 03:21 PM  8 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
I think Futaba also has a large(plastic) wheel, check with Tower.
SHARE  PM  EMAIL  Attn:RR
07-29-2012 03:51 PM  8 years ago
unclejane

rrElite Veteran

santa fe, NM, USA

MyPosts All Forum Topic
These are the ones I used on my whippy E:

http://www.ronlund.com/rcheli-prod/...P/FUTM2035.html

The stock holes are at 19.5mm, which is close enough, so you don't have to measure and drill new ones. I got the blue light on my Beast when I did the setup so they seem to give the right geometry.

The only pain is you have to trim the wheels on the aileron and pitch servos so they'll clear the canopy.

I believe these will work with Savox servos since they have the Fut. splines...

LS
SHARE  PM  EMAIL  Attn:RR
07-29-2012 11:41 PM  8 years ago
FLYERCLD

rrVeteran

Proctor, Arkansas

MyPosts All Forum Topic
Thanks for everyones help. I had some in my hobby case. Got them installed.

Thanks Again
Charles
Old pilots never die they just fade away
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 597 views Topic Closed
Print TOPIC

 2  Topic Subscribe

Tuesday, April 20 - 6:24 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online