RunRyder RC
WATCH
 1 page 570 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › What all do I need to run my Vbar with a 3ch Futaba FASS SBUS RX??
07-25-2012 07:49 AM  8 years ago
Topic Vote0Post 1
BladeStrikes

rrElite Veteran

Shelby TWP,Mi

MyPosts All Forum Topic
What all do I need to run my Vbar with a 3ch Futaba FASS SBUS RX??
I never used either of these so what else do I need cable wise?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-25-2012 07:55 AM  8 years ago
jbiter

rrKey Veteran

Sebring, FL

MyPosts All Forum Topic
All it takes is one jumper from the receiver to the Vbar controller. If you are buying a new Vbar, the jumper is included with the unit.

Jeff
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-25-2012 08:12 AM  8 years ago
BladeStrikes

rrElite Veteran

Shelby TWP,Mi

MyPosts All Forum Topic
Jeff,
One of these jumpers??

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-25-2012 11:06 AM  8 years ago
jbiter

rrKey Veteran

Sebring, FL

MyPosts All Forum Topic
Yes, only one jumper is required. Plug one end into the Sbus port on your receiver and the other end to the Aux port on the Vbar controller.

If your power setup provides 2 leads, you can plug one into the receiver and the other into the Vbar Controller. If you have only one lead, plug it into the Vbar controller and the receiver will be powered through the jumper.

Yes those are the jumpers I was referring to. If you want more they are here http://www.readyheli.com/MIK4055-V-...31_p_35297.html

They are included with new units

Jeff
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-25-2012 12:42 PM  8 years ago
GetToDaChopper

rrElite Veteran

Las Vegas , NV

MyPosts All Forum Topic
that's the one, at long as it will reach........     ▲
  ▲ ▲
▲ ▲ ▲ One of a Kind !!!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-25-2012 08:35 PM  8 years ago
Big Fil

rrKey Veteran

Santa Rosa, CA

MyPosts All Forum Topic
Also, when you are in the software the rx setup tab will show you how to wire your rx once s-bus is selected from the drop down menu.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 570 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › What all do I need to run my Vbar with a 3ch Futaba FASS SBUS RX??
Print TOPIC

 1  Topic Subscribe

Thursday, April 15 - 4:04 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online