RunRyder RC
 3  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1269 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsFutaba CGY › Governor not matching up with 8Fg Gov menu
08-11-2012 04:24 PM  5 years agoPost 21
Zaaaguy72

rrElite Veteran

MN

My Posts: All  Forum  Topic

Are you in Gov or limit mode?

Team Sanjel!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-11-2012 04:25 PM  5 years agoPost 22
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

Gov mode.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2012 04:32 PM  5 years agoPost 23
Seasick78

rrNovice

North America

My Posts: All  Forum  Topic

I had The same problem on my gasser. I switched polarity on the rpm sensor and it fixed the problem.

Josh

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2012 04:59 PM  5 years agoPost 24
Zaaaguy72

rrElite Veteran

MN

My Posts: All  Forum  Topic

He says he is getting 96% on the sensor though so that cant be it. It does not sound like the gov is coming on. Did you calibrate the gov to come on at 30% throttle like the manual says? Can you look at the 750 screen and see if the gov is turning on?

Team Sanjel!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-11-2012 05:14 PM  5 years agoPost 25
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

Yes gov comes on at 30%. Its fine if I'm in mormal mode with no gov. But as soon as hit the switch it goes wide open.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR  Quote
08-11-2012 05:46 PM  5 years agoPost 26
Zaaaguy72

rrElite Veteran

MN

My Posts: All  Forum  Topic

So the gov comes on in normal mode and holds the headspeed above 30%, but only in normal mode?

Team Sanjel!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-11-2012 05:50 PM  5 years agoPost 27
Zaaaguy72

rrElite Veteran

MN

My Posts: All  Forum  Topic

The gov is assigned to a separate switch than the flight modes? I have mine turn on above 30% in normal mode than stays on till the throttle comes back down. Each flight mode has its own headspeed setup.

Team Sanjel!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-11-2012 07:14 PM  5 years agoPost 28
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

I have gov off in normal mode. My gov switch is with my flight mode switch. Normal, gov off, Idle 1, 1900rpm, and idle 2 is 2050rpm.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR  Quote
08-12-2012 11:33 PM  5 years agoPost 29
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

It sets the lower limit the gov can go to It defaults to 45% This is too high for some setups and will cause overspeed
I went back through gov setup and lowered the lower limit to 25% and it worked. Thanks for all the sugestions.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1269 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsFutaba CGY › Governor not matching up with 8Fg Gov menu
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, June 24 - 8:00 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online