RunRyder RC
WATCH |
1 page 2360 views | Post Reply |
| RunRyder | RunRyder |
|
|
0| Skytrek
rrApprentice Suffolk, Va |
Raptor 90 conversion system Here's what we came up with; we made a plate that fits between the frames and bolts to the existing fan shroud. The drive system utilizes the raptors starter shaft and bearings. Steve turned a coupling to connect the motor to a 6mm shaft fitted through the bearing block. The whole system is adjustable for changing out pinions and gears (Simple and effective). I weighed all the parts removed such as motor, gas tank, clutch, throttle servo, muffler and governor. When compared it to the batteries and ESC I came out 1.3 lbs to the good. Also the batteries are movable to achieve CG. Works awesome!         I looked all over for a conversion kit and did quite a bit of research. During this time I discovered quite a few people looking for one too. Well fellers Steve has done all the hard work and has saved all the CAD drawings. So if you want one contact me or head to Steve and Joe Crashes web sight at........
http://www.totallyscrewedmachineshop.com/helis.html Steve says he can most likely manufacture the kit for those in need. |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
 PJRono
rrKey Veteran Minnesota, Ya! |
 |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| Skytrek
rrApprentice Suffolk, Va |
 Just joking looks like we are both brilliant! LOL
Nice job (looks awesome)how yours holding up?? I would suspect very well based on how well mine went together. |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| PJRono
rrKey Veteran Minnesota, Ya! |
|
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| Rod Rodriguez
rrNovice rockwall, TX |
|
| SHARE PM EMAIL Attn:RR Quote | |
WATCH |
1 page 2360 views | Post Reply |
| RunRyder | RunRyder |
|
|
Wednesday, April 21 - 5:32 am - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies
