RunRyder RC
WATCH
 1 page 644 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Hyperion servos come apart?!?!?
06-06-2012 09:38 PM  6 years agoPost 1
Tbird

rrKey Veteran

Indiana

My Posts: All  Forum  Topic

I had some older hyperion servos on a Gasser, and the boards kept, coming unsoldered from the motor mid fight... I thought it was from the extra vibrations of the gasser engine, but today I was flying a nitro with a HV hyperion tail servo landed, and realized the tail servo died at that exact moment...... pulled it apart yup the little wire that is soldered to the side of the motor case came off... Got lucky I wasn't mid flight. I fixed the servo but leary to run them now.. is this a known problem or just my bad luck.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2012 03:04 AM  6 years agoPost 2
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

I might be inclined to investigate the overall level of high frequency vibration in your model. I suspect the servos are a symptom of a much bigger issue.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2012 03:10 AM  6 years agoPost 3
Tbird

rrKey Veteran

Indiana

My Posts: All  Forum  Topic

Two totally different helis???

PM  EMAIL  GALLERY  Attn:RR  Quote
06-28-2012 03:23 AM  6 years agoPost 4
Tbird

rrKey Veteran

Indiana

My Posts: All  Forum  Topic

had another servo quit on me today, in a different heli and different sero..... starting to get scared about these hyperions..

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 644 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Hyperion servos come apart?!?!?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, July 19 - 3:17 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online