First time using FBL - on anything.
First time using 3GX - any version.
Using 3GX on my Trex 450 Pro, upgraded to 2.0
Went through the "non-PC" setup procedure with no problems.
Now, I have a flying - and stable - helicopter.
It flys okay - but nothing spectacular. I think it flew better as FB'ed.
The question - What do the settings in the "Flight Mode Parameter 1", "Flight mode parameter 2" & "Rudder parameters" really mean?
EG: If I adjust my "Flight mode parameter 1" "Aileron roll rate adjustment" to 70%, the "Movement Speed" shows 300 (degrees per second?). But, if I increase it to 80%, the Roll Rate is still at 300. It is like 70% is the max
I'm not getting the "pop" I expected.
EG: I set the collective to +/- 13 degrees (per the instructions) and the first time I did a full negative pitch decent (while upright), I almost couldn't pull out - I had to jamb full positive collective to transition back to a positive climb.