RunRyder RC
WATCH
 1 page 633 views POST REPLY
HomeAircraftHelicopterMiniature Aircraft Whiplash & Fury 55 › Fury extreme swash rebuild
06-03-2012 04:33 AM  6 years agoPost 1
cmdiduca

rrVeteran

Mt. Pocono, Pa

My Posts: All  Forum  Topic

I just bought a used fury and noticed the swashplate has a little play in it. What parts are needed to rebuild and what is the procedure to get the thing apart?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2012 05:10 AM  6 years agoPost 2
angelob

rrKey Veteran

Stoughton WI

My Posts: All  Forum  Topic

There should be 4 tiny set screws around the perimiter of the swash - have you adjusted these to see if you can remove play before deciding on a rebuild?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2012 05:38 AM  6 years agoPost 3
cmdiduca

rrVeteran

Mt. Pocono, Pa

My Posts: All  Forum  Topic

What is proper adjustment of those screws?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2012 08:50 AM  6 years agoPost 4
angelob

rrKey Veteran

Stoughton WI

My Posts: All  Forum  Topic

This is out of the Fury Extreme manual:
Building Notes - Flip the swashplate over to its
bottom and locate the four 3mm threaded holes.
These four holes and set screws are for periodically
minimizing any free play that may develop as the
swashplate bearing wears (excessive free play can
cause inaccuracies in control inputs). Apply a small
amount of blue thread lock to the threads of the set
screws and using a 1.5mm allen driver, install each
set screw loosely into these holes. The adjustment
procedure is to rotate the inner swashplate ring
within the outer ring and adjust the set screw until a
slightly irregular or “notchy” feeling occurs, then
loosen the set screw just enough to return the
assembly to smooth operation. Repeat the
procedure for each set screw. In most cases, this
procedure should be done after every 20 gallons of
fuel. (This procedure can easily be done on an
assembled model by simply disconnecting the
related ball links.)

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2012 01:15 PM  6 years agoPost 5
cmdiduca

rrVeteran

Mt. Pocono, Pa

My Posts: All  Forum  Topic

Thanks angelob, I should probably print a copy of the extreme manual because I did not get one with the fury. It's 100 or so pages which means 50.00 in ink cartridges.
Thanks
I'll give it a try

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2012 11:52 PM  6 years agoPost 6
geomecc

rrKey Veteran

Long Island ,NY

My Posts: All  Forum  Topic

u can download a copy of the manual and just refer to it off ur phone or laptop instead of printing it out. that's what I did for my fury xtream and stratus

R I P Roman Jr. Team SKOOKUM SRW EFC

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2012 12:19 AM  6 years agoPost 7
cmdiduca

rrVeteran

Mt. Pocono, Pa

My Posts: All  Forum  Topic

Hey George everything ok with that head? I ordered the 122-205 fbl head for that extreme. I am going to convert the tempest head for fbl when it comes in.
Chris

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2012 01:39 AM  6 years agoPost 8
geomecc

rrKey Veteran

Long Island ,NY

My Posts: All  Forum  Topic

yes chris thankyou did u get those parts today? I'm planning on using the head to replace one that was damaged in a inverted crash

R I P Roman Jr. Team SKOOKUM SRW EFC

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2012 01:43 AM  6 years agoPost 9
cmdiduca

rrVeteran

Mt. Pocono, Pa

My Posts: All  Forum  Topic

Been gone all day. Look forward to opening the box when I get home!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 633 views POST REPLY
HomeAircraftHelicopterMiniature Aircraft Whiplash & Fury 55 › Fury extreme swash rebuild
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, July 22 - 12:07 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online