RunRyder RC
WATCH
 1 page 3737 views POST REPLY
HomeAircraftHelicopter
e-
Elec-Helicopters New or Limited Activity
Outrage › Got my Fusion 50 going!!
06-01-2012 05:24 PM  6 years agoPost 1
Tbird

rrKey Veteran

Indiana

My Posts: All  Forum  Topic

Finally got my fusion 50 flying... Very nice helicopter this is my first bigger brushless heli, and it has way more power than I was expecting!...

Fusion 50 FBl
Outrage 9180 on cyclic
Outrage 9188 on tail
2s lipo straight power
Ar7200BX for testing
Castle Phoenix HV110
Align 600MX motor, 510kv 13t pinion
Zippy 6s 3000 mah packs seems to work ..

Climb out makes my old V50 look like a snail

I do have a few question. I have my timing ect low, and running fixed end points with a v curve on the throttle in my tx... can anyone tell me what timing, and settings they use, and cut off? after a full flight my gear was still cold... seems I should be able to squeeze a little more power out of it!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2012 02:13 AM  6 years agoPost 2
honda411

rrKey Veteran

Surprise, AZ USA

My Posts: All  Forum  Topic

Bad Ass Canopy man!

HeliDirect Field Rep, Synergy N7 w/ OS 105, Torq Servos, Cyclone/ Rail blades

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2012 02:47 AM  6 years agoPost 3
poboy

rrApprentice

alabama

My Posts: All  Forum  Topic

Nice Fusion!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2012 02:54 AM  6 years agoPost 4
Tbird

rrKey Veteran

Indiana

My Posts: All  Forum  Topic

Thanks, Im not used to a heli that is this responsive!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2012 05:03 AM  6 years agoPost 5
spence46

rrNovice

Chandler AZ

My Posts: All  Forum  Topic

I would highly recommend "set rpm governor mode" with the CC ESC. Not sure of the timing setting to use with that motor but keep the gain low, like around 12, or you will strip gears. I use 2000, 2100, and 2150 for my headspeed settings, but I have a different kv motor.

Mark

PM  EMAIL  Attn:RR  Quote
06-02-2012 05:13 AM  6 years agoPost 6
Tbird

rrKey Veteran

Indiana

My Posts: All  Forum  Topic

I honestly am not sure how to set GOV mode can you help me out? I am using low timing low every low head speed changes ect..

PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2012 05:21 AM  6 years agoPost 7
spence46

rrNovice

Chandler AZ

My Posts: All  Forum  Topic

Do you have castle link?

Mark

PM  EMAIL  Attn:RR  Quote
06-03-2012 03:57 AM  6 years agoPost 8
Tbird

rrKey Veteran

Indiana

My Posts: All  Forum  Topic

yep

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2012 05:54 AM  6 years agoPost 9
spence46

rrNovice

Chandler AZ

My Posts: All  Forum  Topic

In the throttle tab set vehicle type to heli, throttle type to governor, click SET RPM. After that it will prompt you to complete "Vehicle setup Information". Just follow the prompts after that. Depending on the HS you want you may have to up your pinion, it will tell you when you set the HS you want if it is achievable. Hope this helps.

Mark

PM  EMAIL  Attn:RR  Quote
06-05-2012 01:34 AM  6 years agoPost 10
dodgeboy

rrApprentice

slidell, LA

My Posts: All  Forum  Topic

where did you find that canopy ? that is sweet.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2012 04:19 AM  6 years agoPost 11
honda411

rrKey Veteran

Surprise, AZ USA

My Posts: All  Forum  Topic

And always remember to do your throttle calibration, and your throttle hold( so you can get a fast recovery)

HeliDirect Field Rep, Synergy N7 w/ OS 105, Torq Servos, Cyclone/ Rail blades

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2012 11:12 AM  5 years agoPost 12
sdayb4

rrNovice

Alamogordo, NM US

My Posts: All  Forum  Topic

Very nice canopy. Have the same 1

PM  EMAIL  GALLERY  Attn:RR  Quote
11-02-2012 02:43 PM  5 years agoPost 13
DemetriusUSN

rrVeteran

Virginia Beach, Va USA

My Posts: All  Forum  Topic

The best advice I can give is, call Castle Creations and they will tell you which way to go. I have a Fusion 50 12s 3300 mah, CC Bec pro, hyperion hv servos, Outrage 560kv motor. I called castle, followed the videos on castle site and my baby flies like a dream. Here you will get 20 different answers, call the pros, Castle and you won't go wrong. Hope this helps, because I love my Fusion.

Minicopter Diabolo 800, Minicopter Triabolo 700, Minicopter Diabolo 700, Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 3737 views POST REPLY
HomeAircraftHelicopter
e-
Elec-Helicopters New or Limited Activity
Outrage › Got my Fusion 50 going!!
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, September 20 - 10:04 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online