RunRyder RC
WATCH
 1 page 961 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Blade
Other › Initial setup on Blade 450x
06-01-2012 01:39 AM  6 years agoPost 1
gologo

rrKey Veteran

Sedalia, Mo USA

My Posts: All  Forum  Topic

Hi guys, a member of our club just bought one and he already had a
dx6i, so got the bind n fly version. He has programmed the 450 into
his Tx, but controls are backward. In fact, by one of the pages in the
manual, it would appear he is in mode 1 on the Tx. Is that possible?

Throttle and rudder work normally on the left stick, and aileron works
on the right. But right stick is working collective and left is elev.
We switched elev. and aux 1 on the Beastx rx, but no change, and by
the servo reversing menu, all are in the proper direction..
And swashmix is inhibited.

Any ideas where we should go next, or is this something simple we are
overlooking? Thanks.

PM  EMAIL  GALLERY  Attn:RR
06-01-2012 03:28 AM  6 years agoPost 2
pH7

rrKey Veteran

Sterling Heights, MI - USA

My Posts: All  Forum  Topic

The Tx needs to be set as single servo normal swash, not as CCPM. If this is wrong, all kinds of things could be wrong.

PM  EMAIL  GALLERY  Attn:RR
06-01-2012 03:44 AM  6 years agoPost 3
gologo

rrKey Veteran

Sedalia, Mo USA

My Posts: All  Forum  Topic

Yes, it is set as one servo/90*

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 961 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Blade
Other › Initial setup on Blade 450x
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, July 17 - 3:05 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online