RunRyder RC
WATCH
 1 page 1988 views POST REPLY
HomeAircraftHelicopterMain Discussion › Dismantling Align 600MX motor
05-29-2012 02:00 PM  6 years agoPost 1
rudyy

rrElite Veteran

E. Amherst, NY

My Posts: All  Forum  Topic

Is there a guide somewhere that shows how to dismantle the Align motor for shaft and bearings replacement?

PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2012 02:17 PM  6 years agoPost 2
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

I found this out in Internet Land:
I replaced mine, it was not a big deal. order them up now so you will have them, cost me about 35$.

Loosen up the set screw on the bottom, chuck up the motor shaft in a vise. and twist the back plate back and forth untill it breaks free off the shaft. slide them apart.

Get a piece of 1/4" soft drawn HVAC ACR refrigeration tubing. use that as a punch to pop out the bearings. and just put the new ones in. I used a small amount of thread locker to hold them in. But I may have not used enough.

My first time took about half hour. I never did it before. next time if needed will only be 5 minutes or less.
As for the having to twist the back plate back and forth until it breaks free, my guess would be perhaps there is some loctite-style material holding things together, a little heat may help make things easier.

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2012 05:26 PM  6 years agoPost 3
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

https://rc.runryder.com/t641818p1/

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2012 07:33 PM  6 years agoPost 4
rudyy

rrElite Veteran

E. Amherst, NY

My Posts: All  Forum  Topic

Thanks!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2012 07:59 PM  6 years agoPost 5
GetToDaChopper

rrElite Veteran

Las Vegas , NV

My Posts: All  Forum  Topic

while you have it apart you might want to balance the can as align doesn't do a good job with most of those......

    ▲
  ▲ ▲
▲ ▲ ▲ One of a Kind !!!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1988 views POST REPLY
HomeAircraftHelicopterMain Discussion › Dismantling Align 600MX motor
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, July 17 - 3:29 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online