RunRyder RC
WATCH
 1 page 1202 views POST REPLY
HomeAircraftHelicopterBeginners Corner › Blade 450X aftermarket blades and parts
05-29-2012 05:52 AM  6 years agoPost 1
magi

rrNovice

Drain, Oregon

My Posts: All  Forum  Topic

Howdy there...newbie here...

I am trying to find less expensive CF blades (Horizon $46.00) and also spindle and main shafts. They are out of stock at Horizon. I don't know how to order blades. I know they are 325mm and I measured 3.89mm at the grip end, but I don't see the grip end measurement on any blades.
Where should I look and what should I ask for? I see align 325mm blades for $18 but I don't know if they would fit in the grip ends.
Also, if spindles and main shafts are in stock anywhere I would appreciate knowing. in fact, all help is appreciated!!

magi

PM  EMAIL  Attn:RR  Quote
05-30-2012 06:04 PM  6 years agoPost 2
hellyboy

rrNovice

orlando, fl

My Posts: All  Forum  Topic

The align 3g blades work really well, their a little thinner at the root end but you can just shim them up with a couple of #4 washers. As far as feathering shaft and things like that, I think your pretty well stuck with the blade parts.

PM  EMAIL  Attn:RR  Quote
06-04-2012 03:24 AM  6 years agoPost 3
Gamb

rrApprentice

Belle Mead, NJ USA

My Posts: All  Forum  Topic

Any comparable 325 mm blades will work. As mentioned, you can add "shims", any thin washer to fill in the gap between the blade root and blade grips. Do invest in a blade balancer, so that you can make sure that the blades are equally balanced. Blade balancer's run from $10.00 - $25.00. Some cheaper (and even some expensive) blades can be quite off, and this will give you a very unstable flight.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-10-2012 05:17 AM  6 years agoPost 4
magi

rrNovice

Drain, Oregon

My Posts: All  Forum  Topic

Hello, if you are still reading this thanks for the replys, I haven't checked since a day after I posted it. Sorry, but mu partner is in hospice now so sometimes I get distracted...

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1202 views POST REPLY
HomeAircraftHelicopterBeginners Corner › Blade 450X aftermarket blades and parts
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, July 23 - 3:05 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online