Newberg, Oregon United States
My Posts: All Forum Topic
Have recently installed a 701 in my 600N. I am have a strange issue, with the giro newly installed and all gyro advanced menu options left at defaults, when i piro to the left full stick, the piro is very inconsistent, it will speed up drastically then slow down, when i pump the collective it really makes it piro so fast it turns in to a blurr. Also i have noticed at time the left stick is super sensitive to input, just touching the stick will make the heli rotate 20-30 degrees, this only happens sometimes, can usually get it to do it after aileron tick tock. Everything to the right works great. I have all trims at zero and linkage is centered in rate mode fairly well. My limits are set at 107% each way. I am getting full throw each way. Am using a 9256 servo. I have tried turning d/r way down to slow the piro which slows it down but it still has the same symptoms and will go ballistic, when i realease the rudder it sounds like the tails is going to explode. I have the sensor mounted inverted underneath the electical pod. Have not tried to move its location yet, i had to leave today for work i will be gone 28 days so i will not be able to try suggestions until i return home. Just trying to get some expert advice so i will be ready to go when i arrive.
Any help is greatly appreciated thanks.
ps: Just switched from 611 and same 9256 servo and was not having any issues, most likely eliminating helicopter mechanics set up.