RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4544 views Post Reply
Home✈️Aircraft🚁Helicoptere-BladeBlade mCPX › MCPX Brushless conversion
06-05-2012 02:10 AM  9 years ago
OICU812

rrMaster

Grande Prairie, Alberta, Canada

MyPosts All Forum Topic
Use 500-550 mah cog will be on. ...Once upon a time there were Nitros, flybars and frequency pins...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2012 02:14 AM  9 years ago
MN_heli pilot

rrNovice

Burnville, MN -US

MyPosts All Forum Topic
I already have 12 300 mah batteries I really don't want to order all new ones again until these go bad.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2012 02:30 AM  9 years ago
JKos

rrProfessor

Redondo Beach, CA

MyPosts All Forum Topic
> I already have 12 300 mah batteries

Use them in parallel?

- John
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2012 02:32 AM  9 years ago
OICU812

rrMaster

Grande Prairie, Alberta, Canada

MyPosts All Forum Topic
Good advice John easy to make a little parallel plug....Once upon a time there were Nitros, flybars and frequency pins...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2012 02:38 AM  9 years ago
kym

rrApprentice

Provo Utah

MyPosts All Forum Topic
Used this tail blade and short your tail boom.

http://www.wowhobbies.com/ImageGall...?productId=1518
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2012 03:39 AM  9 years ago
MN_heli pilot

rrNovice

Burnville, MN -US

MyPosts All Forum Topic
Use them in parallel?
I never thought of this. I think its back to the hobby shop tomorrow. What kind of flight time should I expect with this set up?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2012 05:50 AM  9 years ago
OICU812

rrMaster

Grande Prairie, Alberta, Canada

MyPosts All Forum Topic
Depends on your style, abilities, collective pitch but as guess 4-5 minutes tops.....Once upon a time there were Nitros, flybars and frequency pins...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-06-2012 06:54 PM  9 years ago
dhc8guru

rrApprentice

Fort Worth, Texas

MyPosts All Forum Topic
I have some questions?

Description:
-Detailed instruction manual
-Brushless motor with 8t pinion (installed in frame and test run)
looks like a brushed motor in the photo
-10 Amp Brushless speed controller
-New extended tail boom
All eflight MCPX stock booms are now extended
-Two upgraded Batteries
-Modified Main Frame
Although it looks like a stock frame, Looking close at the photo, you can see the mod around the motor. What happens when you you need a replacement frame?
SHARE  PM  EMAIL  Attn:RR  Quote
06-06-2012 09:14 PM  9 years ago
srgfitness

rrNovice

west chester pa usa

MyPosts All Forum Topic
Replacement frame
Replacing the frame is easy. Pick up a replacement at your LHS and do a little trimming. People make the frame mod out to be more difficult than it really is.
Another option is an aftermarket frame. I got a carbon one that I really like.

--Scott
When possible shoot first. When that isn't possible shoot fast.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4544 views Post Reply
Home✈️Aircraft🚁Helicoptere-BladeBlade mCPX › MCPX Brushless conversion
Print TOPIC

 6  Topic Subscribe

Monday, June 14 - 1:22 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online