RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4837 views POST REPLY
HomeAircraftHelicopter
e-
Minicopter
Other › 750mm 16S setup?
05-28-2012 07:01 PM  6 years agoPost 21
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

Thx for that santiago

Awesome can`t wait to get this bugger going, I like the option of the low HS and the big arsed blades!!

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2012 06:15 AM  6 years agoPost 22
faxxe

rrNovice

Graz, Austria

My Posts: All  Forum  Topic

Tailblades?
Impressive bird.

@MoneyPitVictim: how long are the tail blades? 105mm?
Regards,

PM  EMAIL  Attn:RR  Quote
05-29-2012 06:52 AM  6 years agoPost 23
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

Tailblades
using only 108mm ENV blades, plenty for me even at 1550rpm.

For more aggresive flying with very low headspeed, 110mm Radix or 115mm Edge would be better.
If more tail authority is needed for head RPMs below 1600, the optional pulley is required.

EDIT
Beware, EDGE 753mm and anything longer than 105mm tail blades will hit each other. I had no issues with 108mm tails but I do not fly hard 3D or smack.

Santiago

Team Minicopter - PeakAircraft.com
bavarianDEMON- Team Kontronik - Scorpion Motors-

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-11-2012 07:59 PM  6 years agoPost 24
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

Here ia a nice contrast I found flying two speeds with one setup with 710 blades I pressume.

Watch at YouTube

S

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-28-2012 01:39 PM  5 years agoPost 25
NickBee

rrNovice

Morris County, NJ

My Posts: All  Forum  Topic

Great video and info Santiago. What batteries are you using to come in at that mid 10 lb range.

PM  EMAIL  Attn:RR  Quote
08-29-2012 02:42 AM  5 years agoPost 26
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

If I use the Radix 710, no buffer battery and 35C 5100ma Voltz it comes out about 10.7lbs

With the 1900ma Nimh buffer pack, 750mm EDGE (heavy) and 5000ma 45C Nanotech or 65C 5100ma MagnumEnergy packs is about 11.25lbs

I really like the long blade setup and 15t to 16t pinion. It suits my big air, fast aeros with 6 to 8min flights.

For more violent smack flying, the 19t pinion with 690s or 710 blades is more appropiate.

What is great about the Diabolo is that is very tunable with the huge pinion/gearing options and ability to take the stress of powerful motors with NO ad-ons, just pinion change.

Beware of blade contact when using EDGE 753mm and 110mm tails, they will hit. 105mm tails will also touch at the extremes.
The long NHPs are just short of 750mm and will not interfere. See the other thread

Santiago

Team Minicopter - PeakAircraft.com
bavarianDEMON- Team Kontronik - Scorpion Motors-

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-13-2013 01:53 AM  5 years agoPost 27
jcflyer

rrVeteran

Terrytown, La.

My Posts: All  Forum  Topic

[quote]Beware of blade contact when using EDGE 753mm and 110mm tails, they will hit. 105mm tails will also touch at the extremes.
The long NHPs are just short of 750mm and will not interfere. See the other thread

Please explain further, will the 110 tails work with the NHP 750"s??>

Logo 500SE Minicopter Diabolo Banshee #45

PM  EMAIL  GALLERY  Attn:RR  Quote
07-13-2013 12:18 PM  5 years agoPost 28
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

The NHP 750 are actually 743mm long

I flew for a while whith EDGE 753 but I KNEW WELL they could EASILY hit the tail blades and was extremely carefull.

DO NOT DO WHAT I DID unless you want a blade strke. Dont use EDGE 753 unless you have the new 800 boom.

Santiago

Team Minicopter - PeakAircraft.com
bavarianDEMON- Team Kontronik - Scorpion Motors-

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-15-2013 03:39 AM  5 years agoPost 29
jcflyer

rrVeteran

Terrytown, La.

My Posts: All  Forum  Topic

No I don't fly Edge blades, I have the NHP 750's and the NHP 110's.
I was gonna try that combo but they may hit as well, unless you tell me different...

Logo 500SE Minicopter Diabolo Banshee #45

PM  EMAIL  GALLERY  Attn:RR  Quote
07-15-2013 05:30 AM  5 years agoPost 30
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

It should be ok with NHP 743.

I never received a set of 743s so I cant tell you for sure.

IF in doubt, bend the mains down into the tail rotor, you should be able to see if they clear or not.

S

Team Minicopter - PeakAircraft.com
bavarianDEMON- Team Kontronik - Scorpion Motors-

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-26-2013 04:09 AM  4 years agoPost 31
jcflyer

rrVeteran

Terrytown, La.

My Posts: All  Forum  Topic

Well gonna try the 750's tomorrow with 105 tails 16t pinion at 1750 max HS, can't wait to swing these bad boys!!!

Logo 500SE Minicopter Diabolo Banshee #45

PM  EMAIL  GALLERY  Attn:RR  Quote
07-26-2013 05:57 PM  4 years agoPost 32
jcflyer

rrVeteran

Terrytown, La.

My Posts: All  Forum  Topic

Ok flew the new setup this morning, NHP 750's with 105 tails 4525 Ultimate 16T pinion!!!
HS 1550, 1650, and 1750.....................
Awesome I like the blades only made a few flight good starting point!!!

Logo 500SE Minicopter Diabolo Banshee #45

PM  EMAIL  GALLERY  Attn:RR  Quote
08-07-2017 03:25 PM  11 months agoPost 33
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

I am looking for a light 750mm low RPM soft 3D machine
Then these is no point going above 12s. Even 10s would get the job done and you would get more flight time.

BTW the current draw doesn't necessarily increase with added blade length as you generally reduce the rpm.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4837 views POST REPLY
HomeAircraftHelicopter
e-
Minicopter
Other › 750mm 16S setup?
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Saturday, July 21 - 10:03 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online