RunRyder RC
WATCH
 1 page 1190 views Post Reply
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityElyQ › FAI Swash to servo links
04-05-2012 02:59 PM  9 years ago
Topic Vote0Post 1
BobbyD2

rrNovice

Ohio

MyPosts All Forum Topic
FAI Swash to servo links
Any recomendations for swash to servo links on a flybarred 50C? The stock ones are a bit short and it looks the ones included in EQ30048 may be a bit long. Looks like I need about 43mm to center of links.

Suggestions?

Cheers!
SHARE  PM  EMAIL  Attn:RR  Quote
04-05-2012 03:44 PM  9 years ago
Bradscope

rrNovice

Cookeville TN USA

MyPosts All Forum Topic
I just installed the FAI swash on my V50C and used EQ31010. Those are the perfect length.Which transmitter switch turns off gravity?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2012 04:04 PM  9 years ago
BobbyD2

rrNovice

Ohio

MyPosts All Forum Topic
Fantastic! Thank you.

I see them at rcheliworkz for the V50E. Ordering now.

Cheers!
SHARE  PM  EMAIL  Attn:RR  Quote
04-08-2012 02:45 AM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
yes they are short you need to buy 2 link kits for the fb head. you need to use the ones that go from the swash to the flybar sux you only get 2 in a pack. those are perfect lenght manual page number "S020-2" part number "8110500A" they come in a pack but only 2 you need 3Novarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-09-2012 12:51 AM  9 years ago
BobbyD2

rrNovice

Ohio

MyPosts All Forum Topic
Yes, those are the same 2.3x30mm. If you get the EQ31010 as suggested by Brad, you get 6 rods. Don't know why you get 6, but they are the same size. Or go with 2 of the packs as you suggested.

They work perfectly.
SHARE  PM  EMAIL  Attn:RR  Quote
04-09-2012 03:51 AM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
you need 3 rods 1 for each servo going to swash and you only get 2 in a pack so you need to get 2 packs to get the thirdNovarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-09-2012 03:52 AM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
all the new kits like the v50e come with the right linkage rods so you might actually be able to buy the linkage rods from the v50e kit and be ok. I will have to do some digging in the new manual but that might be the better way to go. gimme a fewNovarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-09-2012 04:31 AM  9 years ago
BobbyD2

rrNovice

Ohio

MyPosts All Forum Topic
Perhaps you don't understand. You get 6 links in the EQ31010 (2.3mmx30mm)for $3.90. I know you only need 3 for the swash to servo. So you can put 3 in the trash. Or buy 2 of the EQ30048 for $4.85 each which contain the 8110500A as you suggested, which 2 are 2.3x30mm. So... spend $3.90 and have extras (or trash the rest) or spend $9.70 and get 2 packs for a total of 4 links, one of which you will toss in the trash.

I think the better deal is the EQ31010 for 6 links. I have them and they are installed and work perfecty. The other 3 are going in the spares box.

Cheers!
SHARE  PM  EMAIL  Attn:RR  Quote
04-09-2012 09:17 PM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
im getting confused maybe they offer newrods now. When i got the rods i bought the set of rods for the whole head. Came with all kinds of them. And out of all those you only get two the right size(ones going from swash to flybar) therefore i needed to buy 2 packs to get the third one. send me a link of the ones you are talking aboutNovarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-09-2012 09:24 PM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
i cant post a link to the product due to being a rep but heres the part number of the pack i got "EQ30048" now only two of the rods are the right size meaning you have to buy another pack to get the third. Thease ARE needed to get the swash dead center between mainframe and bottom of headblock for maximum travel top and bottomNovarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-09-2012 09:27 PM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
Now the elctric just came out. it comes with the fai swash so they must make them now as a single pack. I will dig out my electric manual in a sec and see if i cant get a part numberNovarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-09-2012 09:29 PM  9 years ago
BobbyD2

rrNovice

Ohio

MyPosts All Forum Topic
SHARE  PM  EMAIL  Attn:RR  Quote
04-09-2012 09:38 PM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
ok bobby sorry i was misunderstanding you. your 100% right. eq31010 IS what you want. those links are a new part number from the elctric but they are exactly what you need and you get 2 sets!!! thanx for keeping me digging this is very usefull information as elyq doesnt explain any of thisNovarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-09-2012 09:44 PM  9 years ago
BobbyD2

rrNovice

Ohio

MyPosts All Forum Topic
Maybe another nugget for you to put on the tips and tricks. Converting to FAI swash and link to the new rods.
SHARE  PM  EMAIL  Attn:RR  Quote
04-09-2012 09:49 PM  9 years ago
wifeorheli

rrElite Veteran

reno, nevada usa

MyPosts All Forum Topic
+1 bobby glad we got it figured out. I just wasnt sure they had put all the new parts up yet or even had them in stock so didnt want to mention the new part numbers but were all good. Good investigating!!!! im happy they have done this shoud have done this from the get go and not have to rob parts from other stuff.Novarossi Motors U.S.A
www.PLanethobby.com
Team GrandRc.com
Team Byron Fuels
ZRC U.S.A. "PushGlo, SwitchGlo"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1190 views Post Reply
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityElyQ › FAI Swash to servo links
Print TOPIC

 1  Topic Subscribe

Tuesday, July 27 - 5:16 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online