RunRyder RC
WATCH
 1 page 1834 views POST REPLY
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityAHF › Installing the gv-1 governor on my Aeolus Heli.
04-01-2012 08:41 PM  7 years ago
Topic Vote0Post 1
viperleap

rrNovice

raleigh,NC- USA

MyPosts All Forum Topic
Installing the gv-1 governor on my Aeolus Heli.
I want to install the gv-1 gov but i am confused some, the kit has a sensor magnet in the bell clutch and in the gv-1 manual it has it in the fan. Can I use the existing magnet in the clutch or should I go ahead and drill a hole in the fan and place the magnet there, I have glued the sensor magnet already into the clutch piece and with the shroud around the fan, is it possible to add the sensor and magnet. I would appreciate some suggestions first before I make a blunder of my heli kit, thanks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2012 03:19 PM  7 years ago
viperleap

rrNovice

raleigh,NC- USA

MyPosts All Forum Topic
????????
??????? nobody wants to touch on this topic?????
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-06-2012 03:19 AM  7 years ago
Tom Wrobleski

rrApprentice

Wyoming Michigan

MyPosts All Forum Topic
It will work either way. On the clutch will work just fine.
I have the 701 gyro gov. combo in my Trex 700 and the magnet is on the clutch bell no problems.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-06-2012 04:06 PM  7 years ago
viperleap

rrNovice

raleigh,NC- USA

MyPosts All Forum Topic
Good to Know
Thanks Wrobleski even though I have gone ahead and drill a hole in the fan, I was concern because most heli fans, the fins turned upward and on the Aeolus the fins are downward. I wasn't sure if that would work, I will post the outcome once I finalize setup, still waiting on some items for the kit.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-13-2012 04:07 PM  7 years ago
Magnumeng

rrVeteran

Good old NC

MyPosts All Forum Topic
Viper,

How did you setup turn out?

Chad
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-26-2012 11:13 PM  7 years ago
viperleap

rrNovice

raleigh,NC- USA

MyPosts All Forum Topic
Aeolus heli and GV-1 Gov
Setup was good, found out where to place magnet and it turned out ok.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1834 views POST REPLY
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityAHF › Installing the gv-1 governor on my Aeolus Heli.
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, August 25 - 9:57 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online