RunRyder RC
WATCH
 1 page 1384 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › AR7200BX Failsafes
04-01-2012 05:24 PM  7 years ago
Topic Vote0Post 1
The_Widowmaker

rrElite Veteran

Bear Valley Springs, CA

MyPosts All Forum Topic
AR7200BX Failsafes
Does the AR7200BX not support preset failsafe ? Im assuming it does not because I have attempted to bind preset failsafes and while it binds using the procedure, the controls do not go to the preset positions.
"I'm a Virgin.. I'm just not very good at it. "
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-02-2012 02:14 AM  7 years ago
dkshema

rrMaster

Cedar Rapids, IA

MyPosts All Forum Topic
No.

The AR7200BX per the manual has the "Smartsafe" failsafe only. It will drive the throttle to whatever position you have the throttle stick at the time of binding, and will maintain last known position on all other surfaces during signal loss.

It does NOT have the ability for preset failsafe positions.
-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 11:22 PM  7 years ago
aerocal

rrApprentice

Central California

MyPosts All Forum Topic
Correct.
Primary controls "hold last position" during a "Hold" situation while throttle and others go to preset positions.Smartsafe however does drive all channels to the preset position during powerup while it is in limbo before the connection is made.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1384 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › AR7200BX Failsafes
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, August 18 - 12:26 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online