RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 3333 views POST REPLY
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › magnets or stator gator?
03-30-2012 08:02 PM  7 years ago
lewma

rrApprentice

San Diego, CA

MyPosts All Forum Topic
+1 for SG. it doesn't get any easier ( or more reliable )
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-31-2012 12:10 AM  7 years ago
DEDO

rrApprentice

FREDERICA, DE.

MyPosts All Forum Topic
Ok who is using a SG with a CGY 75o? Are you using a jumper for more voltage to the sensor?Peace Out BOBBY D.
"GOBLIN PRo GASSER"
ZeN G290,HC3SX,MKS,
Maidened 8/24/12 FL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-31-2012 01:45 AM  7 years ago
Carey Shurley

rrElite Veteran

Orlando, FL - USA

MyPosts All Forum Topic
U have to use a jumper with 701/750Proprietor - Gas Powered Helicopters
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 07:32 AM  7 years ago
DEDO

rrApprentice

FREDERICA, DE.

MyPosts All Forum Topic
plug and play,must now mean. fab a jumper because the sg will NOT WORK WITH THE VOLTAGE SUPPLLYED BY THE SENSOR PORT OF A CGY 750 reliably without one ...Peace Out BOBBY D.
"GOBLIN PRo GASSER"
ZeN G290,HC3SX,MKS,
Maidened 8/24/12 FL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 03:14 PM  7 years ago
ocr231

rrApprentice

Webster MA

MyPosts All Forum Topic
U have to use a jumper with 701/750
Yes, you were told this when you asked.You can get a jumper from. http://www.thestatorgator.com/
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 03:55 PM  7 years ago
Justin Stuart (RIP)

rrMaster

Plano, Texas

MyPosts All Forum Topic
That's a cool new website.Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 04:33 PM  7 years ago
classic

rrElite Veteran

All over the place!

MyPosts All Forum Topic
Do not fab your own jumper, this is not a simple jumper, it had to be modified to work. If you just make a simple "Y" connector you will fry your 701/750.

That is why they cost 15 bucks, for parts and labor to make.

Please keep in mind, the Stator Gator did not change, it is the same stator gator, Futaba made the change when they changed the output voltage in the signal port on the 701/750 to a lower voltage then what the GV-1 signal port puts out.

Bobby,
plug and play means 3 simple plugs.
First, take a stator gator, plug it into a modified jumper,

Second, plug one servo end marked {GOV} into your 701 or 750 or your V-bar.

Third, plug the other servo end marked {REC} into an extra servo port on your radio reciever.

Thanks Justin, my kid designed it.
Which is worse, ignorance or apathy? I don't know and I don't care!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 04:36 PM  7 years ago
rbort

rrProfessor

Franklin, MA - USA

MyPosts All Forum Topic
Your kid
Thanks Justin, my kid designed it.
I see most of the content is Carey's work. You don't mean him do you?

All kidding aside, nice work by Carey.

-=>Raja.
MA 1005 Hanson 280, 4264 flts
Spectra 27 3DMax, 3386 flts
Whiplash V1-2 Hanson 300, 1797 flts
Whiplash V2 Hanson 300, 686 flts
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-02-2012 04:42 PM  7 years ago
Carey Shurley

rrElite Veteran

Orlando, FL - USA

MyPosts All Forum Topic
there is no issue with the content. I approved its use and was properly credited for itProprietor - Gas Powered Helicopters
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 04:44 PM  7 years ago
classic

rrElite Veteran

All over the place!

MyPosts All Forum Topic
All kidding aside, nice work by Carey.
Not sure what you are trying to imply Raja,
I would appricate you not insulting my kid, I thought she did a pretty nice job.

Like I said, my kid designed the web site itself, Carey wrote most of the instructions content in web site, as is pretty ovious by the credit being given to him and Gas powered thoughts at Helifreak...
Which is worse, ignorance or apathy? I don't know and I don't care!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 04:48 PM  7 years ago
rbort

rrProfessor

Franklin, MA - USA

MyPosts All Forum Topic
Nothing bad
I said it was good don't take it the wrong way guys.

-=>Raja.
MA 1005 Hanson 280, 4264 flts
Spectra 27 3DMax, 3386 flts
Whiplash V1-2 Hanson 300, 1797 flts
Whiplash V2 Hanson 300, 686 flts
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-02-2012 10:25 PM  7 years ago
classic

rrElite Veteran

All over the place!

MyPosts All Forum Topic
For those of you who do not want to buy a special jumper and would rather make their own, Try this.

Carefully pull the red wire from the servo wire going to the gov from the SG. Then carefully put that red wire into another servo plug by itself, then plug that 2nd servo plug into a spare servo port on the receiver.
This will put power into the stator gator so it can send a signal to the gov. without sending power directly into the power bus on the 701/750.
Which is worse, ignorance or apathy? I don't know and I don't care!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 11:02 PM  7 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
Rather than irreparably hacking apart the wires (by separating the red wire from the rest) coming out of the SG, I took the information you just gave me to make a new adapter harness.

It looks like this.
  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 11:49 PM  7 years ago
mike4406

rrApprentice

tampa fl

MyPosts All Forum Topic
Question,,, if you are running straight 2S, can the stator gator handle that voltage from the rec'r?
SHARE  PM  EMAIL  Attn:RR  Quote
04-03-2012 12:41 AM  7 years ago
classic

rrElite Veteran

All over the place!

MyPosts All Forum Topic
The Ei stator gator can, I haven't tried that much voltage through the RC or PUH. I wouldn't recommend more then 6v.Which is worse, ignorance or apathy? I don't know and I don't care!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2012 01:21 AM  7 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
I can confirm that the new harness works as expected.
I just tested it and I'm getting 99% on the CGY750

  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2012 03:06 AM  7 years ago
DEDO

rrApprentice

FREDERICA, DE.

MyPosts All Forum Topic
Dood, can the sg be tested static without the engine running?Peace Out BOBBY D.
"GOBLIN PRo GASSER"
ZeN G290,HC3SX,MKS,
Maidened 8/24/12 FL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2012 03:23 AM  7 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
Yep. Just remove the spark plug and turn the engine over.  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2012 03:25 AM  7 years ago
DEDO

rrApprentice

FREDERICA, DE.

MyPosts All Forum Topic
Well I am not getting any sensor test reading with out the engine running. But I know it must be working, cuz I just started her us and the CGY 750 says she idols at 540 rpm.Peace Out BOBBY D.
"GOBLIN PRo GASSER"
ZeN G290,HC3SX,MKS,
Maidened 8/24/12 FL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 3333 views POST REPLY
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › magnets or stator gator?
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Tuesday, August 20 - 3:05 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online