RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1811 views POST REPLY
04-02-2012 07:27 PM  7 years ago
CX1

rrKey Veteran

Canada

MyPosts All Forum Topic
did you take off the head and spin it up " what I usualy do when tracking a vibe" check to see if the swash wobbles.
I found a bad swash this way.
if you got a high point balancer and a spare main shaft check the head for balance, also good to check main gear for balance as well.
" Team Protoast "
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-02-2012 07:39 PM  7 years ago
Scott1115

rrElite Veteran

Greenwich, CT

MyPosts All Forum Topic
Did not, but I can check the swash. The balancer may be a diff issue, but it would have to be way off to cause the shaking I had.Compass 7HV, Trex 550E
RCRCC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 10:08 PM  7 years ago
DaveW

rrApprentice

Newark, DE

MyPosts All Forum Topic
Did you do what I said?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2012 10:23 PM  7 years ago
Scott1115

rrElite Veteran

Greenwich, CT

MyPosts All Forum Topic
@ DaveW - yes, I did. ThanksCompass 7HV, Trex 550E
RCRCC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-04-2012 03:43 PM  7 years ago
GetToDaChopper

rrElite Veteran

Las Vegas , NV

MyPosts All Forum Topic
i know it sound crazy but sometimes servos seem good but all it takes is just the smallest little flick of sh!t in it and it can do horrible things to a FBL system.....

i had a servo ones that didn't strip the metal gears BUT one of the gear teeth have got deformed just a hair and my FBL system had a cow ! and i didn't see that fact intill i cleaned them and then looked at them with a magnifying glass
    ▲
  ▲ ▲
▲ ▲ ▲ One of a Kind !!!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-04-2012 04:23 PM  7 years ago
Scott1115

rrElite Veteran

Greenwich, CT

MyPosts All Forum Topic
I've done everything else, what do I have to lose?

replaced sensor and found two missing balls in one of he thrust bearings - all is good now!
Compass 7HV, Trex 550E
RCRCC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-18-2012 11:04 AM  7 years ago
MikeKimC

rrNovice

Ontario Canada

MyPosts All Forum Topic
I like to add that if you stored your heli over a long period of time with the blade in the opened position (not using your blade holder) that you could have created flat spots on your dampeners due to the weight of the blades. This is not from personal experience mind you ... just something that I've come across in one of the forums.

Cheers
Mike
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1811 views POST REPLY
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Tuesday, September 17 - 11:18 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online