RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2841 views POST REPLY
HomeAircraftHelicopterSynergy R/CSynergy N5c › New N5c What to do with all the wires!!!
03-09-2012 05:40 AM  6 years agoPost 1
sonnyhad

rrProfessor

Holland,Mi

My Posts: All  Forum  Topic

Just getting to all the avionics and if I had any hair I'd be pulling it about now! Would any of you guys be so kind as to share some insight or pictures maybe? The build went great can't wait to get it in the air!

Bald Pilots usually wear hats!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-09-2012 02:57 PM  6 years agoPost 2
bmw576

rrKey Veteran

Traverse city MI USA

My Posts: All  Forum  Topic

Team Synergy, Synergy E5, E7, E9, N5c and N7

PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2012 05:29 AM  6 years agoPost 3
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

That's pretty clean.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-11-2012 04:51 AM  6 years agoPost 4
sonnyhad

rrProfessor

Holland,Mi

My Posts: All  Forum  Topic

Yup, it is at that. I'm finding that I will have one servo wire on the outside of the servo tray, is that what you guys come up with?

Bald Pilots usually wear hats!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-11-2012 02:05 PM  6 years agoPost 5
bmw576

rrKey Veteran

Traverse city MI USA

My Posts: All  Forum  Topic

I ran all of my servo and governor wires inside the servo tray. If you want to run the wires inside you will have to do a little cutting.

Team Synergy, Synergy E5, E7, E9, N5c and N7

PM  EMAIL  GALLERY  Attn:RR  Quote
03-11-2012 02:09 PM  6 years agoPost 6
Darren Lee

rrElite Veteran

Woodstock, GA

My Posts: All  Forum  Topic

What's your setup Sonny? Here's how I did mine...

Team Synergy / Rail Blades / Morgan Fuel

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 12:06 AM  6 years agoPost 7
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

^+1 Nice

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 12:22 AM  6 years agoPost 8
AaronJohnson

rrElite Veteran

mason,MI

My Posts: All  Forum  Topic

Futaba install!!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 01:28 AM  6 years agoPost 9
sonnyhad

rrProfessor

Holland,Mi

My Posts: All  Forum  Topic

You always make em look pretty Aaron!! Very nice!!
How'd it fly today!

Bald Pilots usually wear hats!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 01:30 AM  6 years agoPost 10
sonnyhad

rrProfessor

Holland,Mi

My Posts: All  Forum  Topic

Beeflyer2, I pretty much have the same setup you have! Except I'm using a switch am am thinking about trying to mount the ar7100r on the side so the battery isn't so far out in front, or does that mess with the C of G? Anything special with the Beastx I should know about?

Bald Pilots usually wear hats!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 02:06 AM  6 years agoPost 11
seldred

rrVeteran

Newnan, GA

My Posts: All  Forum  Topic

Here is how I have mine run. I had a vbar on it and had two different configurations, but now I am using the CGY 750 and this is the best wiring job I have done on the heli so far.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 02:09 AM  6 years agoPost 12
sonnyhad

rrProfessor

Holland,Mi

My Posts: All  Forum  Topic

That's about as clean as you can get I'd say!

Bald Pilots usually wear hats!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 02:19 AM  6 years agoPost 13
seldred

rrVeteran

Newnan, GA

My Posts: All  Forum  Topic

Getting the wires clean on this heli isn't too hard, just a little time consuming. Hope to see some pics when you get yours all wired up!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 03:42 AM  6 years agoPost 14
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

Did you guys install anything on ther left side? I have JR with the adapter

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 04:19 AM  6 years agoPost 15
seldred

rrVeteran

Newnan, GA

My Posts: All  Forum  Topic

I have my switch glo and receiver on the left side just below the throttle servo

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 04:37 AM  6 years agoPost 16
AaronJohnson

rrElite Veteran

mason,MI

My Posts: All  Forum  Topic

Mine is all on right side like the pic shows. One tip I could offer you Sonny. Unbolt the radio tray....bundle extra wires and stick them under it. Then bolt it back on.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 04:50 AM  6 years agoPost 17
sonnyhad

rrProfessor

Holland,Mi

My Posts: All  Forum  Topic

Yeah, that's what I was thinking so i haven't even bolted it on yet.

Bald Pilots usually wear hats!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-12-2012 10:27 AM  6 years agoPost 18
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

Thanks seldred

PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2012 10:32 PM  6 years agoPost 19
outrage90

rrApprentice

south aiken

My Posts: All  Forum  Topic

Heres mine

PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2012 11:55 PM  6 years agoPost 20
sonnyhad

rrProfessor

Holland,Mi

My Posts: All  Forum  Topic

That's different, is that maybe an N5?

Bald Pilots usually wear hats!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2841 views POST REPLY
HomeAircraftHelicopterSynergy R/CSynergy N5c › New N5c What to do with all the wires!!!
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Wednesday, July 18 - 12:24 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online