RunRyder RC
WATCH
 1 page 680 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsbavarianDEMON › HC3-SX maping help to DX8
03-08-2012 11:28 PM  6 years agoPost 1
BABoyd

rrNovice

Lewisville N.C. USA

My Posts: All  Forum  Topic

how to get heli command rescue mode on aux3 so govenor will work on aux2

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2012 11:50 PM  6 years agoPost 2
F1 Rocket

rrKey Veteran

Melbourne, Florida USA

My Posts: All  Forum  Topic

If you are using DSMX sats directly with the HC you can assign the Head gain/Horizon to TX channel 8 on the RC page of the HC software. Assign TX channel 7 to Output 2 and should should be good to go as far as the HC is concerned. If you are using DSM2 sats you are restricted to 7 channels and will need to give up the ability to adjust the tail gain from the TX.

If you are using a receiver with the supplied interface cable you would plug the Head gain/Horizon wire into channel 8 of the receiver.

Danny

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 680 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsbavarianDEMON › HC3-SX maping help to DX8
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, July 21 - 11:09 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online