RunRyder RC
WATCH
 1 page 769 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Programming conventional channels on a Futaba R6203SB
03-07-2012 03:51 PM  6 years agoPost 1
jackheli

rrProfessor

Vancouver - Canada

My Posts: All  Forum  Topic

Hello,

Is it possible to program which channels are outputted on the three conventional ports on the R6203SB? for example, I would like to program the receiver to output channels 5, 6 and 7 where it now outputs 1, 2 and 3.

If possible, how do I program which channel I want on which port?

Thanks in advance.

It's easy to find an excuse to do wrong. Hard is not to find an excuse to do right.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 03:55 PM  6 years agoPost 2
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

What TX? You assign the channels in the Function menu of the radio (if Futaba).

Team Synergy/Rail, Team Scorpion, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 03:59 PM  6 years agoPost 3
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

Yes. This is done within the transmitter. It's done in the function menu and is actually very easy to do.

With the 8FG,
For example, by entering the function menu, you will see that the default for CH.1 is for aileron. It is controlled by "J1" and trimmed with T1. Simply highlight "Ail", press the RTN button, and choose any other function on the list.
You can then choose any switch, slider, dial or trim tab to control that function.

Since you made Aileron go away, go down the list and put Aileron anywhere else on the list. For example, Channel 10, J1, T1.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 06:06 PM  6 years agoPost 4
jackheli

rrProfessor

Vancouver - Canada

My Posts: All  Forum  Topic

It's a 10CH. Don't think it can reassign the channels... can it?

It's easy to find an excuse to do wrong. Hard is not to find an excuse to do right.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 07:15 PM  6 years agoPost 5
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

No, not with a 10C. The radio has to have a function menu to reassign functions to different channels. I'm not aware of that menu in the 10C.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 07:17 PM  6 years agoPost 6
jackheli

rrProfessor

Vancouver - Canada

My Posts: All  Forum  Topic

That is too bad. So I guess I can't use the conventional channels on the receiver after all.

Thanks guys.

It's easy to find an excuse to do wrong. Hard is not to find an excuse to do right.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 07:19 PM  6 years agoPost 7
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

You could probably horse trade that receiver to someone with an 8 channel S.Bus receiver who is using it with something like a 750 and not using the extra PWM channels.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 07:33 PM  6 years agoPost 8
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

I'd be willing to horse trade. I have 2 R6108SB RX's, could always use another R6203SB.

Team Synergy/Rail, Team Scorpion, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 07:35 PM  6 years agoPost 9
Kaborkian

rrNovice

Lafayette, LA USA

My Posts: All  Forum  Topic

If it's new or nearly new, I'll take that trade: your 6203SB for either my R617FS straight up, or your 6203SB + $60 (difference in street price) for my 6208SB.

PM me if your interested.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 09:20 PM  6 years agoPost 10
jackheli

rrProfessor

Vancouver - Canada

My Posts: All  Forum  Topic

I actually need the Sbus for simplicity sake. Thanks for the offers though.

Considering my options, I guess I'll need to commit to a new sbus servo purchase...

Questions:
1- In order to extend the sbus to an sbus servo, can I simply use a y-aileron extension or do I need a Futaba hub or terminal box?

2- Did the pc-link ever come out of the drawing board? Do I need the setting tool to program the servo channel or can I do it through the transmitter?

It's easy to find an excuse to do wrong. Hard is not to find an excuse to do right.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 769 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Programming conventional channels on a Futaba R6203SB
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, November 18 - 8:36 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online