RunRyder RC
WATCH
 1 page 987 views POST REPLY
HomeAircraftHelicopterMain Discussion › Identify these tools.
03-07-2012 12:25 AM  6 years agoPost 1
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

top 2 pieces are paddle gauges. got that one on my own Am I missing any pieces? Just got these parts with a Min Air gasser.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 12:26 AM  6 years agoPost 2
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

There's a flybar locking tool in there (the long thing). One part clamps onto the boom, the other holds the flybar.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 12:33 AM  6 years agoPost 3
Kaborkian

rrNovice

Lafayette, LA USA

My Posts: All  Forum  Topic

Actually, there are 3 flybar locking tools.

The black aluminum part with the long threaded rods is one.

The 2 red anodized triangle-ended pieces snap under the flybar on the head to hold it level for setup.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 12:34 AM  6 years agoPost 4
helitom

rrApprentice

Pine Grove, Calif, USA

My Posts: All  Forum  Topic

The thingy with the thumb screw is a main blade grip puller.

The plastic thingy with the two legs on it is a swash leveling tool.

The "C" clamp looking thing along with the level is a flybar mleving tool. Clamp it on the tail boom and attach to the fly bar. Adjust up/down until the flybar is paralell to the tailboom, which should have been leveled to start with. With flybar leveled, main blade pitch can be accurately set.

The pointy thing slips ove the end of a feathering spindle allowing you to easily slip the length of silicon tubing onto the spindle for the rotor head cushion.

The rest of your mpix is a little too dark for me to clearly see the other stuff.....

The older I get, the fewer things seem worth waiting in line for.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-07-2012 01:53 AM  6 years agoPost 5
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

thanks guys, can you tell me what parts are a complete set? I do have the spring loaded part out of purple anodized aluminum that levels the flybar. I wasnt sure if that was a separate tool of its own so I didnt take a picture of it.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 01:59 AM  6 years agoPost 6
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 02:00 AM  6 years agoPost 7
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

the part on the top left corner of the paper could be a boat prop balancer. The guy I got it from was also big into R/C boats.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 02:01 AM  6 years agoPost 8
Shawn Behrens

rrApprentice

DEEP IN THE BOG

My Posts: All  Forum  Topic

Is that a buggy whip on he right?

shawn

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 02:05 AM  6 years agoPost 9
THX1138

rrElite Veteran

Indianapolis, IN

My Posts: All  Forum  Topic

the pic on the right is a link turning tool...

Lou

Just give me five dudes and two flashbangs...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 02:08 AM  6 years agoPost 10
THX1138

rrElite Veteran

Indianapolis, IN

My Posts: All  Forum  Topic

The two long red aluminum bits are Flybar Paddle alignment tools. On the far left in the top pic is a fan hub puller...

Lou

Just give me five dudes and two flashbangs...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 03:09 AM  6 years agoPost 11
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

the thing with the wing nut is a fan hub puller? Are there any pics online of this stuff? how it attaches?...etc Whats the purple base with the post sticking out?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 03:17 AM  6 years agoPost 12
Ace Dude

rrProfessor

USA

My Posts: All  Forum  Topic

I have the long flybar lock in my toolbox.

  

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 03:30 AM  6 years agoPost 13
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

What is this?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 05:41 AM  6 years agoPost 14
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 06:05 AM  6 years agoPost 15
helitom

rrApprentice

Pine Grove, Calif, USA

My Posts: All  Forum  Topic

The fan hub puller typically has a hex nut as the driver and the blade grip puller typically has the wing nut.

The older I get, the fewer things seem worth waiting in line for.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-07-2012 06:52 AM  6 years agoPost 16
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

helitom, you are correct. Im curios to know what 2 purple pieces are in the very first picture, and the last part that I posted.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2012 07:18 AM  6 years agoPost 17
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

digging through all the papers I found the instructions, I may be missing some parts? The 2 purple parts in the first picture are for a "Flybar Control Arm Alignment Tool" I assume its made by Min Air as well. The instruction don't say. The part number is ST304. Anyone got any other info on it?

PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2012 01:41 AM  6 years agoPost 18
YSRRider

rrElite Veteran

usa

My Posts: All  Forum  Topic

bump

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 987 views POST REPLY
HomeAircraftHelicopterMain Discussion › Identify these tools.
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Saturday, July 21 - 12:05 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online