RunRyder RC
WATCH
 1 page 537 views Post Reply
03-03-2012 04:27 PM  9 years ago
Topic Vote0Post 1
Ben-T-Spindle

rrProfessor

Central Illinois

MyPosts All Forum Topic
Servo Speed Settings
Is it ok to run my BLS451 servos at a speed of 285?
... BTS
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-03-2012 05:24 PM  9 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
All Futaba digital servos to be used on the cyclics can be run @ 285 Hz.

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-03-2012 09:40 PM  9 years ago
Ben-T-Spindle

rrProfessor

Central Illinois

MyPosts All Forum Topic
Thanks Ben. I did read that in the manual but just wanted to make sure they would not overheat.... BTS
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-03-2012 11:08 PM  9 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
Driving frequency is not the key to keeping servos at normal temps with a 750. NOT overvolting and running the head response at no less than 2 is. For those servos, run no more than 6 volts regulated. 6 volts does not mean LiFE, either. 6 volts, max, period.

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2012 12:00 AM  9 years ago
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
Dr. Ben is spot on as usual.

I'm personally using the BLS451's with a SGP Reactor X2 on my Whiplash electric, regulated to 6V.

My servos come down cool, not even a little warm after a hard 3D flight. Using head response 2.

-Darrick
Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 537 views Post Reply
Print TOPIC

 1  Topic Subscribe

Sunday, July 25 - 2:23 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online