RunRyder RC
WATCH
 1 page 807 views Post Reply
02-29-2012 08:09 PM  9 years ago
Topic Vote0Post 1
mrloudly

rrVeteran

Naseby Northampton England

MyPosts All Forum Topic
3GX swash question
Level the swash in DIR no problem and set up directions and throws OK
all works fine. When in flight mode the swash won't stay still... Wanders like a tail in heading hold mode. 600 pro. Have 2 other 3gx 700's and they stay put, am I missing something here? Fly's fine but you gotta watch her on spool up...
Thanks

Andy
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-05-2012 04:38 PM  9 years ago
Dino Spadaccini

rrElite Veteran

USA

MyPosts All Forum Topic
is the heli on the bench when this happensRIP Roman JR
Capt USA Align Factory Team Align - Conquer Your heart
Team Futaba
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-09-2012 09:04 PM  9 years ago
mrloudly

rrVeteran

Naseby Northampton England

MyPosts All Forum Topic
Sorry for late reply, only just picked this up...
Heli fly's fine but swash wanders on the bench, just like HH tail on the floor. It's my only bird that does it and I'd like to bottom it!
Thanks in advance
Andy M
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2012 11:59 PM  8 years ago
Flyagra

rrNovice

Singer Island, Florida

MyPosts All Forum Topic
I'm having same problem. It started when I upgraded to 2.0.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-04-2012 02:45 PM  8 years ago
coolice

rrKey Veteran

Northamptonshire, England

MyPosts All Forum Topic
Hey.

Just a thought, but are you using an existing working model memory and altering it to suit the 3GX? Usual the case if upgrading the model to FBL or from a previous (3G perhaps) FBL controller to the 3GX.
Most problems like this are usually linked to using an existing model memory, rather than starting from a new (blank or reset) model memory in your transmitter.

To rule this out as a possible problem, I would upgrade the 3GX again (using V2.1, as it is much better than previous firmwares now). Then blank/reset your model memory and complete the DIR, gyro and other setup stages again as if it was a brand new model. Then try the flight modes and see if the wandering is still there.

Looking at the simple side, it sounds like there is some trim being added in the other flight mode which isn't present in all others.
.
Ian Contessa
Team Robbe SchluterUK
Midland Helicopters
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 807 views Post Reply
Print TOPIC

 2  Topic Subscribe

Tuesday, July 27 - 10:01 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online