RunRyder RC
WATCH
 1 page 791 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Futaba FASST › A problem with SBD-1‏
02-29-2012 04:54 AM  9 years ago
Topic Vote0Post 1
yangoooo

rrNovice

Nanking,China

MyPosts All Forum Topic
A problem with SBD-1‏
I'm using JR TAGS01 flybarless system with 6208SB.There are 3 gain channels on TAGS01. But 6208SB only have 8 channels .

So I bought a SBD-1.But SBD-1's instruction manual warned that"Do not connect any device (gyro, battery,etc.) other than servos to the servo connector of the SBD-1."

Can I set SBD-1 to 10channel,11channel &12channel for Gain1,Gain2&Gain3.

Thanks in advance!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2012 08:41 PM  9 years ago
Skaluf

rrVeteran

Champaign, IL

MyPosts All Forum Topic
The SBD-1 has not been tested with the JR system. However, it does work with most units currently available.

The SBD-1 will output the signal from channels 10, 11, 12 with no problem.

Please keep in mind, The pulse width specification of JR and Futaba are different. The neutral pulse width of JR is 1500uSec, Futaba is 1520uSec
The gyro sense rate will also differ from our Futaba systems.

The best advice I can give you is to go ahead and try it. I would ground test it very carefully prior to flying.

Steve
Steve Kaluf
Hobbico
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-02-2012 08:45 AM  9 years ago
yangoooo

rrNovice

Nanking,China

MyPosts All Forum Topic
Thank you Steve!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 791 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Futaba FASST › A problem with SBD-1‏
Print TOPIC

 2  Topic Subscribe

Saturday, July 24 - 8:44 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online