RunRyder RC
WATCH
 1 page 1096 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoOther › Xxtreme vbar gov on a 11x
02-27-2012 03:26 PM  9 years ago
Topic Vote0Post 1
BrainDrain_dx

rrKey Veteran

Wichita KS

MyPosts All Forum Topic
Xxtreme vbar gov on a 11x
Someone asked, I thought I'd share.

Vbar gov is simple from the radio side. First you set it up in the vbar software, on gov 1 page choose
Gov mode: electric
preset set: channel one
output socket: esc port

On gov II page set
max headspeed to desired max, I use 1800
gear ratio is 9.722 I believe(whatever is in the xxtreme manual)
Sensor to 5

I played with the throttle servo adjustment but the default 100-100 worked fine on my extreme. My motor starts to spin about -94 so I could use -96 or -98 but 100 worked fine. I think somewhere Mr. Mel suggests -108 for easier starts.

Now on the status window at the bottom of Gov II there is a RPM requested. Make sure your radio/vbar is on but motor/esc is not plugged in. Go to edit your throttle curves in the radio and make sure you do not choose servo hold as you need to see the output in the software. Edit normal by pushing the throttle stick all the way forward and start with the last point(100%) on the throttle curve. Click it down to desired headspeed shown in the software rpm requested field, I think mine was around 92%(guessing from memory) 1600 rpm requested. Then do the mid point same percent. Watch out because there are 3 or 4 clicks per percent and the rpm requested can change as you move the stick from 50 to 100 if they aren't identical. Dont just use the radio %, use the rpm requested in the software as your guide. Then switch to idle 1 and set it(again I start at 100% and work my way backwards), mine is something like 96-96-96 and idle 2 is 100-100-100. That is all I can think of, go fly and enjoy perfect headspeed

There is also idle bailout but I didn't set that up yet. A little more tricky with the programming.

If you don't like how far you have to move the stick up to get the motor going then add a point in the normal throttle curve at like 25% and set it to match your rpm requested of the other two points.
KDS Agile 7.2/5.5 Chase 360 - SkyHero Spyder/Spy/Little Spyder
Sponsored by my Visa
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-28-2012 12:06 AM  9 years ago
soberflierross

rrApprentice

Cottage Grove, MN USA

MyPosts All Forum Topic
thanks for the help my maiden went perfectly today

gov is really nice once you get the concept it does sound wierd at 1st

man this thing is FUN!!!!!!!!!!!!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-28-2012 12:50 AM  9 years ago
BrainDrain_dx

rrKey Veteran

Wichita KS

MyPosts All Forum Topic
glad I could help.
Enjoying mine too!
KDS Agile 7.2/5.5 Chase 360 - SkyHero Spyder/Spy/Little Spyder
Sponsored by my Visa
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-28-2012 07:09 AM  9 years ago
rcmarty

rrVeteran

Penticton , B.C. CANADA

MyPosts All Forum Topic
subscribed

I got an 11x and an xxtreme on the way

martin
What goes up will come down.... one way or another !
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
03-02-2012 10:33 AM  9 years ago
RcTintin

rrNovice

Gloucester England

MyPosts All Forum Topic
Nice write up, many thanks.
SHARE  PM  EMAIL  Attn:RR  Quote
03-02-2012 01:57 PM  9 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
I agree ^^^^^^^ This post made it pretty easy to set up the Gov.

Thank you!
Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-02-2012 09:49 PM  9 years ago
gbtltd

rrNovice

UK

MyPosts All Forum Topic
Excellent you made my setup very easy !
Thanks
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1096 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoOther › Xxtreme vbar gov on a 11x
Print TOPIC

 7  Topic Subscribe

Saturday, July 24 - 8:45 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online